Adding a Key to Printers

This section describes the method for adding a key to printers.
IMPORTANT
A key with the same intended usage as a key already registered to a printer cannot be added to the printer. For example, if the intended usage of the key that you are trying to add is TLS, and a key for TLS is already registered to the printer, the key cannot be added. Only one key of a particular type can be registered to the printer.
If you added a key without an intended usage set, it is necessary to set the intended usage in each target printer.
1.
Select the [Tasks] menu > [Task List].
2.
Click [Create].
3.
Click [[Key/Certificate] Add Keys].
4.
On the [Scheduled] tab, configure the basic information and schedule of the task.
For details, see the following.
5.
On the [Task-Specific Settings] tab, select the target key for the task.
To add the key to all the printers associated with the selected key, select [Add to all printers associated with the selected keys].
6.
On the [Targets] tab, set the target printers and device groups.
For details, see the following.
NOTE
The [Targets] tab is not displayed when [Add to all printers associated with the selected keys] is selected on the [Task-Specific Settings] tab.
7.
Click [Add].
Select the [Tasks] menu > [Task List] to check the information of the registered tasks.
For details, see the following.
Select the [Tasks] menu > [History] to check the status of tasks that are executing or have finished executing.
For details, see the following.