Connecting to a Wireless LAN by Entering a PIN Code (WPS PIN Code Mode)

Document number: 958J-01H
When the wireless LAN router supports WPS PIN code mode, you can establish a connection by registering a PIN code generated on the machine to the wireless LAN router. Use a computer to register the PIN code.
Administrator privileges are required to connect to a wireless LAN.
Required Preparations
Access the wireless LAN router from a computer, and enable registration of a WPS PIN code.
* For details on how to register a WPS PIN code, see the manual of your wireless LAN router.
1
On the control panel, press [Wireless LAN Set.] in the [Home] screen. [Home] Screen
The [Select Network] screen is displayed.
If the login screen appears, enter the System Manager ID and PIN, and then press . Logging In to the Machine
If the message [Enable the wireless LAN?] appears, press [Yes].
If the message [Cannot find the access point.] appears, press [Close].
2
Press [Other Connections].
3
Press [WPS PIN Code Mode].
A PIN code is generated.
Once this screen is displayed, you must register the WPS PIN code to the wireless LAN router within 10 minutes.
4
Access the wireless LAN router from a computer, and register the WPS PIN code to the router.
5
When [Connected.] appears on the control panel, wait a few minutes.
When the machine is connected to the wireless LAN, [] appears on the [Home] screen and screen of each function.
By default, an IP address is set automatically.
To use a specific IP address, set this manually.
Setting IPv4 Addresses
Setting IPv6 Addresses
If an Error Message Appears during Operation and a Connection Cannot Be Established
Press [Close], and repeat the procedure starting from Step 2.


Find manuals for other products
imageRUNNER 2224N / 2224
User's Guide (Product Manual)
USRMA-7993-012023-03Copyright CANON INC. 2023