Adjusting the Paper Folding Position
When you are folding paper using an option with a fold function and the fold position is not where you intended, you can make fine adjustments to the fold position.
1
Press 
(Settings/Registration) 
<Adjustment/Maintenance> <Adjust Action> <Adjust Fold Position>.
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action> <Adjust Fold Position>.2
Check the displayed instructions, and press <Next>.
3
Select the paper source with the loaded usable paper, and press <Start Printing>.
The test page is output.
4
Select the current state of the fold position, and adjust the shift width.
Check the current state of the staple position and the shift width on the test page.
5
Press <OK>.
6
Press <Start Printing> to print the test page again, and check the adjustment results.
To end the adjustment without printing the test page, press <Close>.
7
Press <Done>.
If further adjustment is needed, press <Re-Adjust> and repeat Steps 4 to 6.