Adjusting Print and Finish Quality
Adjust the settings below if printing results are not satisfactory, or if you want to adjust the paper folding position.
Gradation Adjustment
If color gradation reproducibility has become so poor that the printed gradation differs markedly from the print data, make adjustments to improve color gradation reproducibility.
Density Correction
If the density of the printing is significantly different from the original document, this adjusts the scan density to be closer to the original.
Shading Correction
If the image areas of the printing have uneven density, this correction adjusts the printing so that the density is even.
Color Mismatch Correction
If the colors of printing run or blur, color mismatch (color misregistration) may have occurred. The problem may be improved by performing color mismatch correction.
Print Position Adjustment for Each Paper Source
If the print position is shifted when you use a particular paper source, specify the paper source and adjust the print position.
Vividness Setting
You can increase the saturation of colors for color printing.
Image Size Adjustment
If the size of the image copied is slightly different from the original, fine adjustment is performed so that the printed size more closely matches the size of the original.
Dither Pattern Setting
A dither pattern suitable for an image is set to enable the gradations and curves in the image to be reproduced as smoothly as possible in the print.
Color Profile Registration
Use this setting to match colors to other printer models or to ensure that specific colors are reproduced accurately.
Saddle Stitch Position Adjustment
If the saddle stitch position of the paper is not exactly in the middle of the booklet, you can make adjustments to the saddle stitch position.
Saddle Stitch Folding Position Adjustment
You can adjust the saddle stitch folding position during booklet printing.
Paper Folding Position Adjustment
You can adjust the paper fold position when configuring the fold function.