Inner Finisher-L

Paper Sizes
Paper available for the Main Unit (Supported Paper Sizes)
Paper Weight
52 g/m² to 300 g/m²
Paper Type
Paper available for the Main Unit (Supported Paper Types)*1
Capacity Per Tray*2
Upper Tray (Tray B)
50 sheets (75 g/m² / 64 g/m²) (or 5.2 mm in height)
45 sheets (80 g/m²) (or 5.2 mm in height)
Lower Tray (Tray A)
No Collating/Collate/Group mode:
A6R: 30 sheets
A4, B5, A5, A5R, LTR, STMT, STMTR, EXEC, and 16K: 500 sheets (or 52 mm in height)
320 mm x 450 mm (SRA3), 305 mm x 457 mm, A3, B4, A4R, B5R, 11" x 17", LGL, LTRR, 8K, and 16KR: 250 sheets or height 26 mm
Envelopes: 10 sheets
No Collating/Collate/Group mode with different paper sizes:
Combination of A4, B5, and LTR: 500 sheets (or 52 mm in height)
All other combinations: 250 sheets or height 26 mm
Collate + Offset and Group + Offset mode:
A4, B5, LTR, EXEC, and 16K: 500 sheets (or 52 mm in height)
A3, B4, A4R, 11" x 17", LGL, LTRR, and 8K: 250 sheets or height 26 mm
Staple (Corner/Double) mode:
A4, B5, LTR, EXEC, and 16K: 30 sets or height 52 mm
A3, B4, A4R, 11" x 17", LGL, LTRR, and 8K: 30 sets or height 26 mm
Staple (Eco) mode:
A4, B5, LTR, and 16K: 30 sets or height 52 mm
A3, B4, 11" x 17", and 8K: 30 sets or height 26 mm
Staple
Paper Weight
52 g/m2 to 256 g/m2
Max. Stapling Capacity*3
Staple (Corner/Double)*4:
A4, B5, LTR, EXEC, and 16K:
50 sheets (52 g/m2 to 90 g/m2)
30 sheets (91 g/m2 to 105 g/m2)
2 sheets (106 g/m2 to 256 g/m2)
A4R and LTRR:
40 sheets (52 g/m2 to 90 g/m2)
30 sheets (91 g/m2 to 105 g/m2)
2 sheets (106 g/m2 to 256 g/m2)
A3, B4, 11" x 17", LGL, and 8K:
30 sheets (52 g/m2 to 90 g/m2)
20 sheets (91 g/m2 to 105 g/m2)
2 sheets (106 g/m2 to 256 g/m2)
Staple (Eco):
All sizes:
10 sheets (52 g/m2 to 64 g/m2)
8 sheets (65 g/m2 to 81.4 g/m2)
6 sheets (82 g/m2 to 105 g/m2)
Manual Staple*5:
All sizes:
About 50 sheets (52 g/m2)
About 45 sheets (64 g/m2)
About 40 sheets (80 g/m² / 75 g/m²)
Punching (When the inner puncher unit is attached)
Paper Sizes
Two/Four Holes:
Two Holes: A3, B4, A4, A4R, B5, B5R, A5, 11" x 17", LGL, LTR, LTRR, EXEC, 8K, 16K, and 16KR
Four Holes: A3, A4, 11" x 17", LTR, EXEC, 8K, and 16K
Two/Three Holes:
Two Holes: A3, B4, A4, A4R, B5, B5R, A5, 11" x 17", LGL, LTR, LTRR, EXEC, 8K, 16K, and 16KR
Three Holes: A3, B4, A4, B5, 11" x 17", LTR, EXEC, 8K, and 16K
Paper Weight
52 g/m2 to 300 g/m2
Punch Hole
Two/Four Holes or Two/Three Holes
Dimensions (W x D x H)
469 mm x 525 mm x 225 mm 
Weight
Approximately 9.1 kg (Approximately 13.3 kg (when the inner puncher unit is attached))
*1 Lower tray (Tray A): Excluding Thin 2 (two-sided printed), Heavy 7 (with width of 216 mm or more), 1-Sided Coated 5 (with width of 216 mm or more), and 2-Sided Coated 5 (with width of 216 mm or more)
*2 For 80 g/m² / 75 g/m² / 64 g/m² paper only. Capacity varies in other cases.
*3 When the standard staple cartridge is attached. (The maximum stapling capacity may vary, depending on the paper type and weight.)
*4 Up to 2 sheets for coated paper
*5 The thickness of the paper is 4.0 mm or less.
A97C-03E