Paper Jams in the Inner Finisher
1
Open the right cover of the main unit.
When Opening the Right Cover of the Main Unit
Touching the inside of the main unit with an electrostatic charge on your hands may damage the components. Before performing work such as replacing parts or removing paper jams inside the main unit, grip the handle securely and open the right cover of the main unit. A metal plate located behind the handle discharges any static electricity.
If you interrupt work such as replacing parts or removing paper jams inside the main unit, close the right cover of the main unit. When resuming work, grip the handle securely and open the right cover of the main unit. This ensures that any static electricity on your hands is discharged.
2
Check whether paper is jammed in the output area or reversing unit.
If paper is jammed, gently pull it out in the direction of the arrow.
3
Open the left cover of the finisher.
4
Hold the lever ( 
), and slide the inner finisher to the left.
), and slide the inner finisher to the left.
5
Check whether paper is jammed in the inner finisher.
| Lift up the guide at the entrance.  |
 | If paper is jammed, gently pull it out in the direction of the arrow.  |
 | Return the guide to its original position. |
When the Puncher Unit is attached:
| Open the front cover of the puncher unit.  |
| Turn the green knob to feed the jammed paper to the outlet of the puncher unit.  |
| If paper comes out of the outlet of the puncher unit, gently pull the paper out in the direction of the arrow.  |
 | Close the front cover of the puncher unit. |
6
Return the inner finisher to its original position.
7
Close the left cover of the finisher.
Continue following the instructions on the screen to proceed with the interrupted operation or continue clearing paper jams.