Finishing with the Stapler

You can bind each copy with the stapler after a collate or group output.
Place the original. Placing Originals
Press <Copy>. <Home> Screen
Press <Options> on the Copy Basic Features screen. Copy Basic Features Screen
Press <Finishing>.
Press <Staple + Collate> or <Staple + Group>  <Next>.
<Staple> is displayed only when you are printing a PDF file with <Access Stored Files>.
Select how to staple  press <Next>.
Select the staple position.
To staple in one location in the corner of the page, select <Corner> for the staple position.
To staple in two locations in the side of the page, select <Double> for the staple position.
Depending on the option, you can bind the paper by crimping without using staples. Select <Staple-Free (Max 10 pages)> and specify the binding position. This is convenient for when you want to save staples or temporarily bind the paper, as you can easily tear off the paper by rubbing the crimped part.
Press <OK>  <Close>.
Press  (Start).
Copying starts.
Depending on finishing functions, the installation of optional devices is needed. Optional Equipment
Depending on the paper type, you cannot use finishing functions. Hardware Specifications
You can specify the procedure to perform when there are too many sheets to staple at once. <Action When Too Many Sheets to Staple>
When configuring settings in <Access Stored Files>
You can use finishing functions only when printing PDF/XPS files.