Adjusting Density
If the density of the printing is significantly different from the original document, follow the procedure below to adjust the scan density to be closer to the original.
1
Press 
(Settings/Registration) 
<Adjustment/Maintenance> <Adjust Image Quality> <Correct Density>.
(Settings/Registration) <Adjustment/Maintenance> <Adjust Image Quality> <Correct Density>.2
Adjust the density.
 (Items shown on the screen may differ depending on your model and options.) |
When set to the <Dark> side, areas printed with the maximum density are increased. When set to the <Light> side, filled areas, text, and lines may be printed like halftones with dots missing. This setting should mainly be used to adjust the intermediate densities.
3
Press <OK>.