Changes to Adjusting Fan Level for Paper Separation

   
The settings for adjusting the fan level of paper separation for registered custom paper are now compatible with the "POD Deck-F." This setting is applied to the paper loaded in the "POD Deck Lite-C", "POD Deck Lite XL-A", "Multi-drawer Paper Deck-E", or "POD Deck-F".
This function is displayed only if the settings are made available by your local authorized Canon dealer. Even if this function is displayed, do not allow anyone to change the settings except for the system manager. For more information on changing the settings, contact your local authorized Canon dealer.
This adjustment for the fan level is not required since it is automatically adjusted by the main unit. However, the adjustment may prevent paper jam, multi-sheet feeding or corner fold.
1
Press Settings/Registration.
2
Press <Preferences> <Paper Settings> <Paper Type Management Settings>.
3
Select the paper type that you want to edit from the list press <Details/Edit>.
4
Press <Change> for <Adj. Fan Level for Paper Separation>.
5
Press <-> or <+> to adjust necessary items <OK>.
You can also use the numeric keys to set the level.
Side Fan
Lifts the edge of the loaded paper.
Overhead Fan*1
Separates a single sheet from the paper lifted by the side fan.
Suction Fan*1
Suctions the paper separated by the overhead fan to the return belt.
Secondary Suction Fan*1
Suctions the edge of the paper to help separate the sheet from the underlying paper.
Adjustment Range:
[-5] to [-1]:
Select when multiple sheets are fed frequently. If the value is too small, paper jams may occur.
[0]:
The default setting.
[1] to [5]:
Select when paper jams occur frequently. If the value is too large, multiple sheets may be fed.
*1 The specified values are valid only for the POD Deck-F.
6
Press <OK>.
AYJJ-00X