Fax Line Settings
To use the fax on the machine, register the fax number and company or department name to be displayed/printed at the receiving party's fax machine when sending a fax. Also, set the communication channel type.
|
Models with an optional fax functionTo use the fax function, the required fax options must be installed. System Options If the machine is used as a Remote Fax client machineThe <Register Unit Name> and <Select Line Type> settings in the procedure below are not required. |
1
Press 
(Settings/Register).
(Settings/Register).2
Press <Function Settings> 
<Send> <Fax Settings> <Set Line>.
<Send> <Fax Settings> <Set Line>.3
Press <Line 1> <Register Unit Telephone Number>.
<Register Unit Telephone Number>.4
Enter a fax number and press <OK>.
The fax number you registered will be notified to the recipient.
5
Enter a name in <Register Unit Name> and press <OK>.
The name you registered will be notified to the recipient.
Instead of the unit name you specified, you can show or print the sender's name. Basic Operations for Sending Faxes
6
Select a line type in <Select Line Type>, press <OK>.
If you are not sure what kind of line type you are using, please contact your dealer or the sales office of your telephone company.
|
Configure the setting according to the fax option.You can set to automatically switch of the incoming fax and incoming call in <RX Mode>. <RX Mode> |