<Display Settings>

This section describes the display settings.

<Button Display Order on Home Screen>

<Set>

You can rearrange the order in which the buttons appear on the <Home> screen. Customizing the <Home> Screen

<Default Screen After Startup/Restoration>

<Set>

You can set the default screen displayed at startup/restoration.


Depending on the authentication method specified in personal authentication management, the login screen may be displayed before the screen set in <Default Screen After Startup/Restoration> is displayed.

<Language>

<Set>

You can select the language displayed on the display.


Some messages may not be displayed properly in the selected language. In this case, restart the machine. Some messages may not change even after the machine is restarted.

<Millimeter/Inch Entry Switch>

<Set>

You can set whether to enter numeric values in millimeters or inches on the various numeric entry screens.

<Confirm When Loading Paper in Drawer>

<Set>

You can set whether to display the confirmation screen of paper drawer settings when the paper drawer is inserted into the machine.


The confirmation screen of paper drawer settings is not displayed in the following cases. When paper is loaded because it has run out during a job When a paper jam is removed When a screen for executing, canceling, or confirming jobs is displayed When paper is specified in <Paper Settings> on the <Home> screen

<IP Address Display Settings>

<Set>

You can set whether to display the IP address on the <Status Monitor> screen.


This setting is only valid when <Use IPv4> is set to <On>.

<Display Icon Showing Remaining Toner>

<Set>

You can set whether to display an icon indicating the amount of toner remaining in the toner cartridge on the bottom right of the display.

<Display Mobile Portal>

<Set>

You can set whether to display <Mobile Portal> on the <Home> screen.

<Timing of Toner Cart. Replacement Notif.>

<Set>

You can set the amount of toner remaining in the toner cartridge for displaying a message notifying the user that a toner cartridge will need to be replaced soon.

<Waste Toner Container Replacement Notif.>

<Set>

You can set whether to display a message prompting the user to replace the waste toner container.