Setting Up a Connection by Specifying Detailed Settings

If you want to specify the security settings in detail or cannot establish the wireless connection using the other procedures, manually enter all the required information for the wireless LAN connection. Confirm and write down in advance information regarding your SSID, network key, security standard, or authentication/encryption method, etc. Checking the SSID and Network Key
1
Select <Set> on the <Home> screen. <Home> Screen
2
Select <Preferences>  <Network>  <Wireless LAN Settings>  <SSID Settings>.
3
Select <Enter Manually>  enter the SSID that you have checked.
Enter the SSID, and select <Apply>.
For instructions on how to enter text, see Entering Characters.
4
Specify the security settings in <Security Settings>.
Using WEP
1
Select <WEP>.
2
Select an authentication method.
To use the WEP key as a password, select <Shared Key>.
When <Open System> is selected, an authentication error occurs during connection if the wireless router is using shared key authentication. If this happens, the machine automatically changes the setting to <Shared Key> and retries the connection.
3
Select the WEP key that you want to edit.
Select <Edit WEP Key> select any of <WEP Key 1> to <WEP Key 4>.
Up to four WEP keys can be registered.
4
Enter the network key that you have checked.
Enter the network key, and select <Apply>.
5
Select the WEP key to use.
Select <Select WEP Key> select the WEP key you have edited.
Using WPA-PSK, WPA2-PSK, or WPA3-SAE
1
Select <WPA/WPA2-PSK>, <WPA2-PSK/WPA3-SAE>, or <WPA3-SAE>.
2
Select an encryption method.
To set the machine to automatically select AES-CCMP or TKIP to match the setting of the wireless router, press <Auto>.
If you selected <WPA3-SAE> in step 1, proceed to the next step.
3
Enter the network key that you have checked.
Enter the network key, and select <Apply>.
Using WPA-EAP, WPA2-EAP, or WPA3-EAP
1
Select <WPA/WPA2-EAP>.
2
Select <Yes> on the confirmation screen.
5
Select <Yes> on the confirmation screen.
 When the wireless LAN router is detected and the configuration is complete, the screen <Connected.> will be displayed.
9SRC-02F