Specifying Destinations (Direct Input)
To specify a destination not registered to the Address Book or LDAP server, directly enter the destination using the scan or fax screen of the control panel.
Using the Scan Screen
1
On the [Specify Destination] tab of the scan screen, press [Use Keyboard].
2
Enter an e-mail address, and press [Apply].
The destination is specified.
Using the Fax Screen
On the [Enter Dest.] tab of the fax screen, enter a fax number. If you entered an incorrect fax number, press [  ] to clear the number.To enter a second and subsequent destinations, press [Next Dest.]. If the [Confirm] screen is displayed, enter the fax number again, and press [Apply]. When sending a fax to an international destination, enter the international access number, country code, and fax number in that order. If you are unable to connect, press [Pause] in between the numbers to add a pause. You can change the pause time. [Set Pause Time] |