Setting the Paper Size and Type for the Paper Drawer

By default, the paper size and type of the paper drawer are set to LTR and Plain 2. When paper of a different size or type is loaded, change the paper settings.
This section describes how to configure the settings using the control panel.
You can also configure the settings using Remote UI from a computer. Managing the Machine from a Computer (Remote UI)
1
On the control panel, press [Paper Settings] in the [Home] screen. [Home] Screen
2
Select the paper drawer whose setting you want to change.
3
Select the size of the paper loaded in the paper drawer.
You can scroll the screen to view paper sizes not displayed on the screen.
When A5 Size Paper Is Loaded
When paper is loaded in the landscape orientation, select [A5]. When paper is loaded in the portrait orientation, select [A5R].
 
Landscape orientation (A5)
 
Portrait orientation (A5R)
 
 
When Non-standard Size (Custom Size) Paper Is Loaded
1
Press [Custom].
2
Enter the values in [X] and [Y], and press [Apply].
Select [X] or [Y], and enter the length of each side using [+] and [-], with / to move the cursor between the digits for inputting whole numbers and fractions.
When frequently used non-standard sizes are registered, you can call these up by pressing [S1] to [S3].
If a Set Paper Size Is Not Displayed
Press [Other Sizes], and select the paper size from the displayed list.
4
Select the type of the paper loaded in the paper drawer.
The paper size and type are set.
You can change the paper size displayed on the screen in Step 3. Hiding Unused Paper Sizes
965L-032