Preparing to Print from a USB Memory Device

Configure the settings to be able to print data from a USB memory device.
This section describes how to configure the settings using Remote UI from a computer.
On the control panel, select [Menu] in the [Home] screen, and then select [Function Settings] to configure the settings. [Memory Media Settings]
Administrator privileges are required. The machine must be restarted to apply the settings.
1
Log in to Remote UI in System Manager Mode. Starting Remote UI
2
On the Portal page of Remote UI, click [Settings/Registration]. Portal Page of Remote UI
3
Click [Store/Access Files Settings] [Memory Media Settings] [Edit].
The [Edit Memory Media Settings] screen is displayed.
4
Select the [Memory Media Print] checkbox, and click [OK].
5
Restart the machine. Restarting the Machine
The settings are applied.
Selecting an Operation When a USB Memory Device Is Connected
You can configure the settings to display a screen for selecting and immediately executing an operation (scanning from a USB memory device or Memory Media Print) when a USB memory device is inserted into the machine.
Log in to Remote UI in System Manager Mode  [Settings/Registration]  [Store/Access Files Settings]  [Edit] in [Display Screen When Memory Media is Connected]  select the [Display Screen When Memory Media is Connected] checkbox  [OK]
Using the control panel, configure the settings in the [Home] screen from [Menu]  [Function Settings]. [Screen When Mem. Med. Conn]
965L-04F