Configuring FTP PASV Mode
PASV mode is an FTP communication mode. You must configure PASV mode when there is a firewall between the FTP server and the machine.
This section describes how to configure the settings using Remote UI from a computer.
On the control panel, select [Menu] in the [Home] screen, and then select [Preferences] to configure the settings. [Use FTP PASV Mode]
Administrator privileges are required. The machine must be restarted to apply the settings.
On the control panel, select [Menu] in the [Home] screen, and then select [Preferences] to configure the settings. [Use FTP PASV Mode]
Administrator privileges are required. The machine must be restarted to apply the settings.
Required Preparations |
Check that PASV mode has been configured on the FTP server. |
1
Log in to Remote UI in System Manager Mode. Starting Remote UI
2
On the Portal page of Remote UI, click [Settings/Registration]. Portal Page of Remote UI
3
Click [Network Settings] 
[FTP PASV Mode Settings] [Edit].
[FTP PASV Mode Settings] [Edit].The [Edit FTP PASV Mode Settings] screen is displayed.
4
Select the [Use FTP PASV Mode] checkbox, and click [OK].
5
Restart the machine. Restarting the Machine
The settings are applied.