When the Corners of the Printed Media Are Folded
If the corners of the lead edge of the media are folded during printing, the problem may be able to be alleviated by adjusting the strength of the belt suction air.
1
Select [Optimize] for the media catalog.
2
Adjust the strength of the belt suction air.
Change the value in [Separation suction 1] according to the paper weight and length (add the value in the table below to the current value).
Paper weight | Adjustment Value |
50 g/m2 to 59.9 g/m2 (13.3 lb bond to 15.9 lb bond) | - |
60 g/m2 to 149.9 g/m2 (16 lb bond to 39.9 lb bond) | +5 |
150 g/m2 to 450 g/m2 (39.9 lb bond to 166.4 lb cover) | - |
NOTE
For information on the media catalog, see the PRISMAsync Print Server for iX1700 Operation guide.