Specifying the Initial Settings (Firmware Management)

Configure the settings of this software required for using the Firmware Management.

Select the [System] menu > [System Configuration].

Click [Firmware Management] in [System Configuration].

In [Protocol to Prioritize], select the method for communication between this software and printers.

The firmware is downloaded to the printers from this software using the communication method set here.

When performing encrypted communication

In [Protocol to Prioritize], select [HTTPS].

Select [Install CA certificate for manager or agent on device] to distribute the certificate used for communication with printers from this software.

Select [Communicate with device using HTTP if CA certificate installation failed] to change the protocol for communicating with printers to HTTP when certificate distribution fails.

Set whether to register multiple versions of firmware to this software.

To register multiple versions of firmware for the same model, select the [Enable registration of multiple firmware versions for the same device model] check box.

If the check box is deselected, the old firmware is deleted from this software when the firmware is registered.

Click [Update].