<Maintenance>

This section describes how to use the auto cleaning function for the main unit.

<Clean Pressure Roller for Fixing>

<Set>

If printed paper is dirty, execute <Clean Pressure Roller for Fixing>.

<Clean to Prevent Toner Leaking>

<Set>

You can prevent toner spilling during transportation of the machine over a long distance.

<Clean ITB>

<Set>

If print quality is not good, you can perform ITB unit cleaning.

<Initialize After Replacing Parts>

<Set>

After replacing the consumable parts, execute <Initialize After Replacing Parts> to perform initialization.

<Control Detected Condensation>

<Set>

Set whether to start the process to remove condensation when condensation is detected inside the machine. If you set this mode to <On>, the process to remove condensation is automatically performed. You can also set the machine to not restrict printing while removing condensation.


During the process to remove condensation, printing may not be performed correctly resulting in the paper being blank. To maintain the effect of the process to remove condensation going when this mode is set to <On>, it is necessary to keep the machine's power ON.


If you set <During Condens. Cntrl.> after setting <Control Detected Condensation> to <On>, a screen confirming whether you want to immediately execute condensation control is displayed. Press <OK> to execute the process immediately.