<Management Settings> <User Management> <Authentication Management><User Management>
You can configure the settings for managing users of the machine with a user authentication application.
<Set Administrator Password>
<Set> <Management Settings> <User Management> <Authentication Management>
<Management Settings> <User Management> <Authentication Management>You can change the password used by the Administrator for logging into the Remote UI. When changing the password again, it can only be specified from the Remote UI.
 |
Make sure that you do not forget your password. If you forget your password, contact your dealer or service representative. |
<Set Administrator PIN>
<Set> <Management Settings> <User Management> <Authentication Management>
<Management Settings> <User Management> <Authentication Management>Set whether to require the user to enter a PIN when changing settings that require Administrator privileges from the control panel. The Administrator PIN can also be changed.
|
Make sure that you do not forget your PIN. If you forget your PIN, contact your dealer or service representative. |
<System Manager Information Settings>
<Set> <Management Settings> <User Management>
<Management Settings> <User Management>Set the System Manager information for the machine. Changing the System Manager ID and PIN
<Department ID Management>
<Set> <Management Settings> <User Management>
<Management Settings> <User Management>Select whether to manage users in groups by assigning users to Department IDs. Configuring the Department ID Management Settings
|
You can only select whether to use Department ID Management here. The Remote UI must be used to register department IDs or check the usage status of each department ID. |