<Display Settings>

This section describes the display settings.

<Button Display Order on Home Screen>

<Set>

You can rearrange the order in which the buttons appear on the <Home> screen. Customizing the <Home> Screen

<Default Screen After Startup/Restoration>

<Set>

You can set the default screen displayed at startup/restoration.


Depending on the authentication method specified in personal authentication management, the login screen may be displayed before the screen set in <Default Screen After Startup/Restoration> is displayed.

<Language>

<Set>

You can select the language displayed on the display.


Some messages may not be displayed properly in the selected language. In this case, restart the machine. Some messages may not change even after the machine is restarted.

<Millimeter/Inch Entry Switch>

<Set>

You can set whether to enter numeric values in millimeters or inches on the various numeric entry screens.

<Display Remaining Toner Error Message>

<Set>

Displays a warning screen that enables you to identify which color is running low when remaining toner is low. This message is useful, as it enables you to preparea new toner cartridge in advance, etc.


The warning screen prompting you to prepare a new toner cartridge is displayed. If you press <Close> on the warning screen to close the screen, you can perform normal operations. However, the warning screen will appear every time the machine returns from sleep mode or when the main power is turned ON. If you have already prepared a new toner cartridge, etc., and the notification becomes unnecessary, perform the <Delete Remaining Toner Error> operation. The message indicating the status remains on the bottom of the screen, regardless of this setting.

The warning screen prompting you to prepare a new toner cartridge is displayed.

If you press <Close> on the warning screen to close the screen, you can perform normal operations. However, the warning screen will appear every time the machine returns from sleep mode or when the main power is turned ON.

If you have already prepared a new toner cartridge, etc., and the notification becomes unnecessary, perform the <Delete Remaining Toner Error> operation.

The message indicating the status remains on the bottom of the screen, regardless of this setting.

<Delete Remaining Toner Error>

<Set>

You can delete the warning screen which appears when the remaining toner is low if <Display Remaining Toner Error Message> is set to<On>.


The warning screen will appear again when a different color toner becomes low, if <Display Remaining Toner Error Message> is set to <On>.

<IP Address Display Settings>

<Set>

You can set whether to display the IP address on the <Status Monitor> screen.


This setting is only valid when <Use IPv4> is set to <On>.

<Display Icon Showing Remaining Toner>

<Set>

You can set whether to display an icon indicating the amount of toner remaining in the toner cartridge on the bottom right of the display.

<Display Mobile Portal>

<Set>

You can set whether to display <Mobile Portal> on the <Home> screen.

<Display QR Code on Mobile Portal>

<Set>

You can set whether to display a QR code on the <Mobile Portal> screen. Using a QR code saves you the effort of entering the IPv4 address of the machine.