Network

<Output Report>

<Print>

<Confirm Network Connection>

<Off>, <On>

<Use IPv4>

<Off>, <On>

<IP Address Settings>

<Auto Acquire>
  <Select Protocol>: <Off>, <DHCP>
  <Auto IP>: <Off>, <On>

<Manually Acquire>
 <IP Address>: Enter the IP address.

 <Subnet Mask>: Enter the IP address.

 <Gateway Address>: Enter the IP address.

<Check Settings>

 <IP Address>: Display only

 <Subnet Mask>: Display only

 <Gateway Address>: Display only

<DHCP Option Settings>

<Acquire Host Name>: <Off>, <On>

<DNS Dynamic Update>: <Off>, <On>

<Acquire DNS Server Address>: <Off>, <On>

<Acquire Domain Name>: <Off>, <On>

<Acquire POP Server Address>: <Off>, <On>

<Release Address Last Acquired from DHCP Server When Address Cannot Be Acquired>*1: <Off>, <On>

<DNS Settings>*1

<Primary DNS Server Address>: Enter the IP address.

<Secondary DNS Server Address>: Enter the IP address.

<Host Name>: Canon****** ("******" represents the last six digits of a MAC address.)

<Domain Name>: Enter the domain name.

<Perform DNS Dynamic Update>: <Off>, <On>

<PING Command>

<PING Command>: <0.0.0.0>

<Use IPv6>

<Off>, <On>

<Use Stateless Address>*1: <Off>, <On>

<Use Manual Address>*1: <Off>, <On>

<Use DHCPv6>*1: <Off>, <On>

<Only Retrieve Stateful Address Prefix>

<Off>, <On>

<DHCP Option Settings>

<Acquire DNS Server Address>: <Off>, <On>

<Acquire Domain Name>: <Off>, <On>

<DNS Settings>*1

<Primary DNS Server Address>

<Secondary DNS Server Address>

<Use Same Host Name/Domain Name as IPv4>: <Off>, <On>

<Perform DNS Dynamic Update>: <Off>, <On>

<DNS Server Address Settings>

<Primary DNS Server>: Enter the IP address.

<Secondary DNS Server>: Enter the IP address.

<mDNS Settings>

<Use IPv4 mDNS>: <Off>, <On>

<mDNS Name> (63 characters maximum)

<Use IPv6 mDNS>: <Off>, <On>

<Use IPv4 Name for mDNS>: <Off>, <On>

<LPD Print Settings>

<Off>, <On>

<Output LPD Banner Page>: <Off>, <On>

<RX Timeout>*1: 1 to 5 to 60 (min.)

<RAW Print Settings>

<Off>, <On>

<Bidirectional Comm.>: <Off>, <On>

<RX Timeout>*1: 1 to 5 to 60 (min.)

<SNTP Settings>

<Use SNTP>: <Off>, <On>

<Polling Interval>*1: 10 to 1440 to 2880 min.

<NTP Server Address>*1: (IP Address or Host Name)

<FTP Print Settings>

<Use FTP Printing>: <Off>, <On>

<User Name>: guest

<Password>: 7654321

<Use UTF-8 to Display FTP Print Job Name>

<Off>, <On>

<WSD Settings>

<Use WSD Print>: <Off>, <On>

<Use WSD Browsing>: <Off>, <On>

<IPP Print Settings>

<Off>, <On>

<Allow When Using TLS>: <Off>, <On>

<Use Authentication>: <Off>, <On>

<Multicast Discovery Settings>

<Response>: <Off>, <On>

<Scope Name>

<Sleep Mode Notification Settings>*1

<Notify>: <Off>, <On>

<Port Number>: 1 to 11427 to 65535

<Number of Routers to Traverse>: 0 to 3 to 254

<Notification Interval>: 60 to 600 to 65535 sec.

<Use HTTP>

<Off>, <On>

<TLS Settings>*1

<Use>

<Certificate Details> (<Version>, <Serial Number>, <Signature Algorithm>, <Issued To>, <Validity Start Date>, <Validity End Date>, <Issuer>, <Public Key>, <Certificate Thumbprint>, <Issued To (Alternate Name)>, <Verify Certificate>)

<Key Usage> (Displays what the key pair is being used for)

<Maximum Version>: <TLS 1.0>, <TLS 1.1>, <TLS 1.2>, <TLS 1.3>

<Minimum Version>: <TLS 1.0>, <TLS 1.1>, <TLS 1.2>, <TLS 1.3>

 <AES-CBC (256-bit)>: <Off>, <On>
 <AES-CBC (128-bit)>: <Off>, <On>
 <AES-GCM (256-bit)>: <Off>, <On>
 <AES-GCM (128-bit)>: <Off>, <On>
 <3DES-CBC>: <Off>, <On>
 <CHACHA20-POLY1305>: <Off>, <On>

 <RSA>: <Off>, <On>
 <ECDHE>: <Off>, <On>
 <X25519>: <Off>, <On>

 <RSA>: <Off>, <On>
 <ECDSA>: <Off>, <On>

 <SHA1>: <Off>, <On>
 <SHA256>: <Off>, <On>
 <SHA384>: <Off>, <On>

<Proxy Settings>

<Use Proxy>: <Off>, <On>

<Server Address> (IP Address or FQDN)

<Port Number>: 1 to 80 to 65535

<Proxy wthn Same Domain>: <Off>, <On>

<Authentication Set.>: <Use Proxy Auth.>(<Off>, <On>), <User Name> (24 characters maximum), <Password> (24 characters maximum)

<Confirm Auth Info When in Auth Mngt Mode>

<Off>, <On>

<Use IPSec>

<Off>, <On>

<Receive Non-Policy Packets>*1

<Allow>, <Reject>

<IPSec Policy List>

<Register New IPSec Policy>, <Delete>, <Raise Priority>, <Lower Priority>

<Policy Name> (24 characters maximum), <Policy On/Off> (<Off>, <On>), <Only Allow 256-bit for AES Key Length> (<Off>, <On>), <Selector Settings>, <IKE Settings>, <IPSec Network Settings>

<Local Address Settings> (<All IP Addresses>, <IPv4 Address>, <IPv6 Address>, <IPv4 Manual Settings>, <IPv6 Manual Settings>)

<Remote Address Settings>(<All IP Addresses>, <All IPv4 Addresses>, <All IPv6 Addresses>, <IPv4 Manual Settings>, <IPv6 Manual Settings>)

<Port Settings> (<Specify by Port Number>, <Specify by Service Name>)

<IKE Mode>: <Main>, <Aggressive>

<Validity>: 1 to 480 to 65535 min.

<Authentication Method>: <Pre-Shared Key Method> (<Shared Key Settings>), <Digital Signature Method> (<Key and Certificate>)

<Authentication/Encryption Algorithm> (<Auto>, <Manual Settings>)

<Authentication/Encryption Algorithm>: <Manual Settings>

<Validity>

<Time>: <Off>, <On>

<Validity>

<Size>: <Off>, <On>

<PFS>: <Off>, <On>

<Authentication/Encryption Algorithm>: <Auto>, <Manual Settings>

<Authentication/Encryption Algorithm>: <Manual Settings> (<ESP>, <ESP (AES-GCM)>, <AH (SHA1)>)

<ESP> Settings:

<ESP (AES-GCM)> Settings: None

<AH (SHA1)> Settings: None

<Connection Mode>: <Transport> (display only)

<TCP/IP Option Settings>*1

<Use Window Scale Option>: Off, On

<MTU Size>: 600 to 1500 bytes (600-1500)

<Minimum Value of MSS>:

48 to 560 bytes (48-560)

<Use SNMPv1>

<Off>, <On>

<Use Dedicated Community>: <Off>, <On>

<MIB Access Permission>: <Read/Write>, <Read Only>

<Use Community Name 1>: <Off>, <On>

<MIB Access Permission>: <Read/Write>, <Read Only>

<Community Name>: public

<Use Community Name 2>: <Off>, <On>

<MIB Access Permission>: <Read/Write>, <Read Only>

<Community Name>: public2

<Use SNMPv3>

<Off>, <On>

<Use Administrator>: <Off>, <On>

<User Name>: Display only
<MIB Access Permission>: Display only
<Security Settings>: Display only
<Authentication Algorithm>: Display only
<Encryption Algorithm>: Display only

<Use Same Password as for Authentication>: <Off>, <On>

<Set/Change Password>: <Off>, <On>
<Encryption Password>: Enter the password.
<Confirm>: Enter the password.

<User On/Off>

<Register> (<User Name>, <MIB Access Permission> (<Read/Write>, <Read Only>), <Security Settings> (<Auth. Yes/Encrypt. Yes>, <Auth. Yes/Encrypt. No>, <Auth. No/Encrypt. No>), <Authentication Algorithm> (<MD5>, <SHA1>, <SHA2-224>, <SHA2-256>, <SHA2-384>, <SHA2-512>), <Authentication Password>, <Encryption Algorithm> (<DES>, <AES>), <Encryption Password>)

<Edit User> (<User Name>, <MIB Access Permission> (<Read/Write>, <Read Only>), <Security Settings> (<Auth. Yes/Encrypt. Yes>, <Auth. Yes/Encrypt. No>, <Auth. No/Encrypt. No>), <Authentication Algorithm> (<MD5>, <SHA1>, <SHA2-224>, <SHA2-256>, <SHA2-384>, <SHA2-512>), <Authentication Password>, <Encryption Algorithm> (<DES>, <AES>), <Encryption Password>)

<Delete>

<Get Printer Management Information from Host>*1

<Off>, <On>

<Format Host Resources MIB to RFC2790>

<Off>, <On>

<Dedicated Port Settings>

<Off>, <On>

<Dedicated Port Authentication Method>

<Mode 1>, <Mode 2>

<Use Spool Function>

<Off>, <On>

<Receive in Parallel>

<Off>, <On>

<Waiting Time for Connection at Startup>

0 to 300 sec.

<Ethernet Driver Settings>

<Auto Detect>: <Off>, <On>

<Current Transmission Speed>: Display Only

<MAC Address>: Display only

<Use IEEE 802.1X>

<Off>, <On>

<Login Name> *1

Login Name

<Verify Authentication Server Certificate>*1

<Off>, <On>

<Verify Authentication Server Name
>*1

<Off>, <On>

<Authentication Server Name>*1

Authentication Server Name

<Use TLS>*1

<Off>, <On>

<Key and Certificate>*1

<Use>

<Certificate Details> (<Version>, <Serial Number>, <Signature Algorithm>, <Issued To>, <Validity Start Date>, <Validity End Date>, <Issuer>, <Public Key>, <Certificate Thumbprint>, <Issued To (Alternate Name)>, <Verify Certificate>)

<Key Usage> (Key and Certificate)

<Use TTLS>*1

<Off>, <On>

<Use PEAP>*1

<Off>, <On>

<Use Login Name as User Name>*1

<Off>, <On>,

<User Name> *1

Name of the user to be authenticated with IEEE802.1X authentication

<Password>*1

Password of the user to be authenticated with IEEE802.1X authentication

<Outbound Filter>

<Use Filter>: <Off>, <On>

<Default Policy>*1: <Allow>, <Reject>

<Exception Addresses>*1: <Register New> (Up to 16 IPv4 addresses>, <Delete>

<Inbound Filter>

<Use Filter>: <Off>, <On>

<Default Policy>*1: <Allow>, <Reject>

<Exception Addresses>*1: <Register New> (Up to 16 IPv4 addresses), <Delete>

<IPv4 Address ICMP Settings>*1

<Always Allow Sending/Receiving Using ICMP>: <Off>, <On>

<Outbound Filter>

<Use Filter>: <Off>, <On>

<Default Policy>*1: <Allow>, <Reject>

<Exception Addresses>*1: <Register New> (Up to 16 IPv4 addresses), <Delete>

<Inbound Filter>

<Use Filter>: <Off>, <On>

<Default Policy>*1: <Allow>, <Reject>

<Exception Addresses>*1: <Register New> (Up to 16 IPv4 addresses), <Delete>

<IPv6 Address ICMP Settings>*1

<Always Allow Sending/Receiving Using ICMP>: <Off>, <On>

<Outbound Filter>

<Use Filter>: <Off>, <On>

<Default Policy>*1: <Allow>, <Reject>

<Exception Addresses>*1: <Add> (Up to 100 Mac addresses), <Edit>, <Delete>

<Inbound Filter>

<Use Filter>: <Off>, <On>

<Default Policy>*1: <Allow>, <Reject>

<Exception Addresses>*1: <Add> (Up to 100 Mac addresses), <Edit>, <Delete>

<IP Address Block Log>

<Date/Time>, <Category>, <IP Address>, <Port Number>, <Result>

<Use Mopria>

<Off>, <On>

<Use AirPrint>

<Off>, <On>

<Display Errors for AirPrint>

<Off>, <On>

<Position Information>

<Auto Acquire>

<Latitude>: Specify the latitude.

<Longitude>: Specify the longitude.

<Use IPP Everywhere>

<Off>, <On>

<Basic Settings>

<Use Universal Print>

<Off>, <On>

<Verify Server Certificate>

<Off>, <On>

<Add CN to Verification Items>

<Off>, <On>

<Printer Name>

OIP_PRINTER

<Application ID>

f9fc375cc7ba-4e5c-b213-23affd792cc1

<Microsoft Entra ID Authentication URL>

https://login.microsoftonline.com/organizations/oauth2/v2.0

<Microsoft Entra ID Registration URL>

https://register.print.microsoft.com/api/v1.0/register

<Registration Status>

<URL for Registration>

<Code for Registration>

<Select Interface>

<Wired LAN>, <Wireless LAN>, <Wired LAN + Wired LAN>, <Wired LAN + Wireless LAN>

<WPS Push Button Mode>

<WPS PIN Code Mode>

<SSID Settings>

<Select Access Point>: Select from the list.

WEP authentication: (<WEP Key (5-26 Char.)>: Enter the WEP key

WPA/WPA2-PSK, WPA2-PSK/WPA3-SAE, WPA3-SAE authentication: <Encryption Key>: Enter the passphrase.

<Enter Manually>: Enter SSID.

<Security Settings>: <None>, <WEP>, <WPA/WPA2-PSK>, <WPA/WPA2-EAP>, <WPA2-PSK/WPA3-SAE>, <WPA3-SAE>

<Power Save Mode>

<Off>, <On>

<Connection Information>

<MAC Address>: Display Only
<Wireless LAN Status>: Display Only
<Latest Error Information>: Display Only
<Channel>: Display Only
<SSID Settings>: Display Only
<Security Settings>: Display Only
<Power Save Mode>: Display Only

<Use Direct Connection>

<Off>, <On>

<Direct Connection Type>

<Access Point Mode>, <Wi-Fi Direct>

<Device Name for Wi-Fi Direct>

<Dev Name(Wi-Fi Direct)>: Device Name

<Time Until Direct Connection Termination>

0 = None, 1 to 30 to 60 min.

<Access Point Mode Settings>

<Use Custom SSID>: <Off>, <On>

<SSID (1-32 Characters)>: Enter SSID

<Use Custom Network Key>: <Off>, <On>

<Network Key (10 Char.)>: Enter the network key

<Keep Enabled If SSID/Net. Key Specified>

<Off>, <On>

<Direct Connection IP Address Settings>

<Timeout After Logging in to Remote UI>

15 to 150 min.

Settings/Registration Basic Information

<IP Address Settings>

<Auto Acquire>: <DHCP>, <Off>

<Manually Acquire>
 <IP Address>: <0.0.0.0>
 <Subnet Mask>: <0.0.0.0>
 <Gateway Address>: <0.0.0.0>

<Check Settings>: Display only

<Priority Line for Comm w/ Mobile Devices>

<Main Line>, <Sub Line>

<Ethernet Driver Settings>

<Auto Detect>: <Off>, <On>

<Current Transmission Speed>: Display only

<MAC Address>: Display only

<Outbound Filter>

<Use Filter>: <Off>, <On>

<Default Policy>*1: <Allow>, <Reject>

<Exception Addresses>*1: <Register New> (Up to 16 IPv4 addresses), <Delete>

<Inbound Filter>

<Use Filter>: <Off>, <On>

<Default Policy>*1: <Allow>, <Reject>

<Exception Addresses>*1: <Register New> (Up to 16 IPv4 addresses), <Delete>

<DNS Server Address Settings>

<Primary DNS Server>

<Secondary DNS Server>

<Proxy Settings>

<Use Proxy>: <Off>, <On>

<Server Address> (IP Address or FQDN)

<Port Number>: 1 to 80 to 65535

<Use Proxy Auth.>: <Off>, <On>

<User Name> (24 characters maximum)

<Password> (24 characters maximum)
<Confirm> (24 characters maximum)

<Select Line to Use>

<Main Line>, <Sub Line>

<Static Routing Settings>

<Use Static Routing>: <Off>, <On>

<Register>*1, <Delete>*1

<Destination Address>(<0.0.0.0>), <Gateway Address>(<0.0.0.0>)