Main Unit

Name	Canon imageCLASS LBP468x
Type	Desktop
Resolution for Writing*1	600 dpi x 600 dpi (default), 1,200 dpi x 1,200 dpi (low speed)
Number of Tones	256
Acceptable Paper Stock	Paper Sizes Paper Drawer Max: 297.0 mm x 431.8 mm Min: 85.0 mm x 148.0 mm Multi-Purpose Tray Max: 297.0 mm x 431.8 mm Min: 64.0 mm x 120.0 mm Multi-Purpose Tray (Long Sheet) Max: 297.0 mm x 1,320.0 mm Min: 210.0 mm x 431.9 mm Paper Weight Paper Drawer: 60 g/m² to 163 g/m² Multi-Purpose Tray: 60 g/m² to 250 g/m²
Paper Type	Available Paper
Warm-Up Time*2	After Powering ON When <Quick Startup Settings for Main Power> is set to <On>: 2 seconds or less*3 When <Quick Startup Settings for Main Power> is set to <Off>: 22 seconds or less Returning from the Sleep mode 7 seconds or less
First Print Time	7.0 sedonds or less
Print Speed*4(Plain A4/LTR, 100%)	45 sheets/minute (A4) 44 sheets/minute (LTR)
Paper Feeding System/Capacity *5	Paper Drawer Plain (80 g/m² / 75 g/m² / 64 g/m²): 250 sheets Multi-Purpose Tray Plain (80 g/m² / 75 g/m² / 64 g/m²): 100 sheets Postcard: 40 sheets Envelope: 10 sheets Paper other than above: height 10 mm or less
Inner Tray Capacity*5	250 sheets (80 g/m² / 75 g/m² / 64 g/m²)
Power Source	AC 220 V - 240 V, 3.3 A, 50 Hz/60 Hz
Power Consumption	Maximum Power Consumption 1,710 W or less When the machine is in the Sleep mode When <Sleep Mode Energy Use> is set to <Low>: 1 W or less When <Sleep Mode Energy Use> is set to <High>: 3 W or less When the main power switch is turned OFF When <Quick Startup Settings for Main Power> is set to <On>: Approximately 1.0 W When <Quick Startup Settings for Main Power> is set to <Off>: 0.4 W or less
Dimensions (W x D x H)	499 mm x 546 mm x 354 mm
Weight (Toner cartridges excluded)	Main Unit Approximately 30.2 kg
Installation Space (W x D)	499 mm x 885 mm (When the paper drawer is pulled out) * Provide a space of 100 mm or more around the machine.
Memory Capacity	RAM: 2 GB eMMC: 32 GB (available space: 15 GB)
Environmental Conditions	Temperature: 10 °C to 30 °C Humidity: 20 % to 80 % RH (no condensation)

*1 When printing from a computer, the settings of the printer driver must be configured to change the resolution.

*2 May vary depending on the environment and conditions under which the machine is being used.

*3 Depending on the situations, the machine does not startup quickly.

*4 Print speed is measured based on internal testing using A4/LTR size paper printed with 100% print ratio to original on one-sided paper. Internal testing involved continuously printing the same one page of content on plain paper. Print speed may vary depending on paper type, paper size or paper feeding direction.
The device may automatically pause or slow down in order to adjust printer condition such as controlling temperature of a certain unit or limiting impact to image quality during continuous printing.

*5 May vary depending on the installation environment and paper to use.