Settings/Registration Table

The following settings can be selected or stored on the Settings/Registration screen:


Some of the settings may not be displayed depending on the configuration of optional equipment installed on the machine. Some changes may not be reflected immediately, depending on the settings. In this case, it is necessary to perform one of the following. Select <Yes> on the screen confirming whether you want to make changes. Select <Apply Set. Changes> on the <Home> screen. Restart the machine. The settings that can be specified differ between administrators and general users, and vary depending on restrictions imposed by the administrator.

Some of the settings may not be displayed depending on the configuration of optional equipment installed on the machine.

Some changes may not be reflected immediately, depending on the settings. In this case, it is necessary to perform one of the following.

Select <Yes> on the screen confirming whether you want to make changes.

Select <Apply Set. Changes> on the <Home> screen.

Restart the machine.

The settings that can be specified differ between administrators and general users, and vary depending on restrictions imposed by the administrator.

Description of the Settings

Describes the functions of each setting item on Settings/Registration. The settings that can be operated vary depending on the user authority and the machine you use. Setting items and values are written under Setting Description. The factory defaults are written in bold red characters.

"Can be set in Remote UI"

The "Can be set in Remote UI" item is written for each item in the Settings/Registration table. "Yes" or "No" indicates if the settings can/cannot be set in the Remote UI.

Import All Function

The "Import All Function" item is written in the Settings/Registration table. Depending on whether a setting item can be batch imported, "A", "B", "C", or "No" is written. "A", "B", and "C" refer to the following cases.

Case A

Importing all to your machine

Restoring the settings information to your machine for backups.

Export

Import

Settings Information

Case B

Importing all to the same model machine

Applies to machines of the same series as this machine.

Export

Settings Information

Import

Case C

Importing all to the different model machine

Applies to models that support batch importing.

Export

Settings Information

Import

Name of Item When Exporting with the Remote UI

This section indicates which Settings/Registration items correspond with which items of the batch export function of the Remote UI. "-" is indicated for items that are not imported/exported. Importing/Exporting All Settings
The items that can be selected for the batch export function of the Remote UI are indicated below.

Items That Can Be Selected with the Batch Export Function
Settings/Registration Basic Information
Paper Type Management Settings
Settings for Printer Settings
Department ID Management Settings
Key Settings
Certificate/Certificate Revocation List (CRL) Settings
Authentication User Management
Security Policy Settings
MEAP Application Setting Information