Paper Feed Mode When Using PCL Emulation

You can set the paper source to use for the PCL5 Paper Source command. For details on each setting, see the following table.
Paper Source
Mode 0
Mode 1
Mode 2
Auto
{ec}&l7H
{ec}&l7H
{ec}&l7H
Manual Feed
{ec}&l2H
{ec}&l2H
{ec}&l2H
Multi-Purpose
Tray
{ec}&l4H
{ec}&l8H
Cassette 1 or
Right Deck
{ec}&l1H
{ec}&l1H
{ec}&l1H
Cassette 2 or
Left Deck
{ec}&l5H
{ec}&l4H
{ec}&l4H
Cassette 3
{ec}&l8H or {ec}&l20H
{ec}&l5H
{ec}&l5H or {ec}&l8H
Cassette 4
{ec}&l9H or {ec}&l21H
{ec}&l20H
{ec}&l9H or {ec}&l20H
Cassette 5
{ec}&l10H or {ec}&l23H
{ec}&l21H
Optional Deck
{ec}&l22H
{ec}&l21H
NOTE
The above table includes paper sources that cannot be used with some models. For paper sources not included in the table, the same setting is used for Mode 0 to Mode 2.
For Paper Source command values not included in the table, [Auto] is selected for the paper source.
1.
Select [Set] on the [Home] screen.
2.
Select [Function Settings] → [Printer] → [Paper Feed Mode When Using PCL Emulation].
If a screen to enter the Administrator PIN is displayed, enter the Administrator PIN and press .
3.
Select the button → press .
A3UJ-01A