Front Side
Feeder
You can place two or more sheets of originals in the feeder. The placed originals are fed and scanned one by one automatically. Feeder
Control panel
Use the display and keys to operate the machine and confirm the operations and status. Control Panel
Output tray
Printed and copied paper is ejected to the output tray.
Lift handles
Hold the lift handles when moving the machine.
Power switch
Turns the power of the machine ON and OFF. Turning ON and OFF the Machine
Paper stopper
Open the paper stopper to prevent paper from falling out of the output tray.
Drawer
Load paper you usually use into the Drawer. Drawer
Platen glass
Place books, thick paper, thin paper, and other originals that cannot be placed in the feeder on the platen glass to copy or scan. The placed originals are scanned in a fixed position. Placing Originals
Ventilation slots
Air inside the machine is released through the ventilation slots to cool down the inside of the machine.
Do not place objects next to the ventilation slots, as this can prevent ventilation.
Do not place objects next to the ventilation slots, as this can prevent ventilation.
|
To ensure efficient use of the machine, regularly clean the surface and platen glass. Cleaning the Surface of the Machine Cleaning the Platen Glass If the following symptoms occur when using the feeder, clean the feeder: Cleaning the Feeder Originals become dirty Originals frequently jam Printouts appear smudged after scanning, copying, or sending faxes |