Configuring CHMP
Configure the settings related to the communication that occurs when the driver or application software obtains device information from the machine.
* CHMP is a Canon proprietary protocol.
* CHMP is a Canon proprietary protocol.
Configure these settings using Remote UI from a computer. You cannot use the control panel to configure the settings.
Administrator privileges are required.
Administrator privileges are required.
Required Preparations |
To configure CHMP, you must enable TLS. Using TLS |
1
Log in to Remote UI in System Manager Mode. Starting Remote UI
2
On the Portal page of Remote UI, click [Settings/Registration]. Portal Page of Remote UI
3
Click [Network Settings] 
[CHMP Settings] [Edit].
[CHMP Settings] [Edit].The [Edit CHMP Settings] screen is displayed.
4
Select the [Enable HTTPS Redirection] checkbox.
* Communication that uses CHMP will be redirected to encrypted communication.
5
Click [OK].
The settings are applied.
6
Import the certificate to the computer, as needed.
Perform this operation only if a self-signed certificate is generated when TLS is enabled.
You can skip this step if a self-signed certificate is not generated.
You can skip this step if a self-signed certificate is not generated.
1 | Export the certificate registered to the machine. Log in to Remote UI, and use the browser to export the certificate registered to the machine. For details on how to perform export, see Help in your browser. |
2 | Import the certificate to the computer. Import the exported certificate to your computer. For details on how to import the certificate, see Help in the OS installed on your computer. |