The Printed Barcode Cannot be Scanned

Troubleshoot by checking in the following order:

Are You Using a Very Small Barcode or One With Thick Lines?

Enlarge the barcode.

If the barcode lines are perpendicular to the output feed direction, rotate the image 90° so that the lines are parallel.

Try using Barcode Adjustment Mode

Setting the mode in [Barcode Adjustment Mode] in the printer driver may solve the problem. The improvement effect is weakest with [Mode 1] and strongest with [Mode 5]. Try selecting [Mode 1] first, and then change to the next higher mode, as needed.

Specify the settings below in the [Printing preferences] screen of the printer driver.

[Finishing] tab

[Advanced Settings]

[Barcode Adjustment Mode]

select the mode

* When this setting is enabled, the print density may decrease.

If setting [Barcode Adjustment Mode] to [Mode 5] does not work, changing the [Printer Density] may solve the problem.Adjusting the Print Density