Maintenance
To ensure safe and convenient use of the machine, daily maintenance that includes cleaning and replacement of consumables is required.
If you notice a deterioration in the print quality or frequent paper jams, perform cleaning and adjustment to improve it.
If you notice a deterioration in the print quality or frequent paper jams, perform cleaning and adjustment to improve it.
Performing Maintenance Operations
In addition to performing regular maintenance, operations are required according to the machine status and print quality.
Cleaning
Regularly clean the various parts of the machine. If the paper becomes dirty, or the print quality has deteriorated, clean the parts causing the problem according to the symptoms.
Cleaning the Machine
Cleaning the Machine
Replacing Consumables
If a message about consumables appears on the screen of the control panel or Remote UI, or the print quality deteriorates, replace the consumables.
Replacing Consumables
Replacing Consumables
Adjusting the Print Density
If printed text or fine lines appear faded, adjust the print density.
Adjusting the Print Density
Adjusting the Print Density
Changing the Installation Location
When moving the machine, perform the prescribed procedure to prevent accident or damage.
Moving the Machine
Moving the Machine
 |
Maintenance and InspectionsThe minimum holding period for performance parts for repairs and toner cartridges is seven (7) years after production of the machine model is discontinued. If the problem still cannot be resolved or you think the machine needs to be checked, contact your dealer or service representative. If the Problem Persists InstallationIf you find the machine's operation to be noisy in some operating modes or due to your surroundings, we recommend setting up the machine in a separate location from your office. Water droplets (condensation) may form inside the machine if the room where the machine is installed is heated rapidly, or if the machine is moved from a cool, dry location to a warm, humid location. Using the machine under these conditions may result in problems such as paper jams, poor print quality, or faults. Allow the machine adjust to the ambient temperature and humidity for at least two hours before use. The machine may not operate properly when used at high altitudes (3,280 yards (3,000 meters) above sea level or higher). |
See Also
Checking the Required Troubleshooting Solutions from the Symptoms
You can check the required maintenance operations and settings according to the status of the machine and the error description.
Paper Jams
Problems with Printing Results
Paper and Paper Feeding Problems
Paper Jams
Problems with Printing Results
Paper and Paper Feeding Problems
Viewing the Number of Printed Pages and Machine Usage
As a guide to when to perform maintenance, you can view the number of printed pages using the counter and view the usage of the machine from reports and lists.
Monitoring the Usage
Monitoring the Usage