Preparing to Save Scanned Data to a USB Memory Device
Document number: A3JJ-059
This enables saving of scanned data to a USB memory device. This machine does not allow saving by default.
This section describes how to configure the settings using Remote UI from a computer. On the operation panel, select [Menu] in the [Home] screen, and then select [Function Settings] to configure the settings. [Memory Media Settings] Administrator privileges are required. The machine must be restarted to apply the settings.
Selecting an Operation When a USB Memory Device Is Connected
You can configure the settings to display a screen for selecting and immediately executing an operation (scanning from a USB memory device or Memory Media Print) when a USB memory device is inserted into the machine.
Log in to Remote UI in System Manager Mode [Settings/Registration] [Store/Access Files Settings] [Edit] of [Display Screen When Memory Media is Connected] select the [Display Screen When Memory Media is Connected] checkbox [OK]
Using the operation panel, configure the settings in the [Home] screen from [Menu] [Function Settings]. [Screen When Mem. Med. Conn]
This site uses cookies to provide its contents and functions and improve their qualities etc. You can find out more about our use of the cookies here. If you select "Reject", only cookies necessary to provide the contents and functions of the site are recorded and stored.