If you cannot access Remote UI, the firewall settings of the machine may be incorrect, preventing communication with the computer. Use the following procedure to disable the firewall settings with the control panel, and then use Remote UI to configure the firewall again.
Administrator privileges are required. The machine must be restarted to apply the settings.
1
Disable the firewall settings.
To Disable IPv4 Address Filter
[Home] screen on the control panel [Menu] [Preferences] [Network] [Firewall Settings] [IPv4 Address Filter] [Outbound Filter] or [Inbound Filter] [Off] [Apply] Restart the machine.
To Disable IPv6 Address Filter
[Home] screen on the control panel [Menu] [Preferences] [Network] [Firewall Settings] [IPv6 Address Filter] [Outbound Filter] or [Inbound Filter] [Off] [Apply] Restart the machine.
To Disable MAC Address Filter
[Home] screen on the control panel [Menu] [Preferences] [Network] [Firewall Settings] [MAC Address Filter] [Outbound Filter] or [Inbound Filter] [Off] [Apply] Restart the machine.
Uninstall the installed driver, and then reinstall it. For details about uninstalling and installing drivers, see the driver manual at the online manual site. https://oip.manual.canon/
Are You Using Resident Software?
If you are using resident software, such as security software, disable it and then try printing.
Can You Print from Another Computer in the Network?
If you cannot print from another computer, contact your dealer or service representative. If the Problem Persists
This site uses cookies to provide its contents and functions and improve their qualities etc. You can find out more about our use of the cookies here. If you select "Reject", only cookies necessary to provide the contents and functions of the site are recorded and stored.