Other Changes to the User's Guide
About the Machine 
Parts and Their Functions Front Side
The third IMPORTANT statement in "Connecting a USB Memory Device" has been changed.
 |
Make sure that the USB memory device is oriented properly when connecting it to the machine. If it is not connected properly, it may cause the USB memory device or machine to malfunction. Make sure to follow the proper procedure when removing the USB memory device. Removing the memory media Failure to do so may cause the USB memory device or machine to malfunction. You can use a USB memory device with a FAT32 (up to 32 GB) or exFAT (up to 2 TB) file system. |
About the Machine Hardware Specifications Main Unit
A remark regarding "Resolution for Writing" has been added.
Resolution for Writing*1 | 600 dpi x 600 dpi 1,200 dpi x 1,200 dpi (at half speed) |
*1 When copying: 600 dpi x 600 dpi |
Basic Operations Setting Sounds
The description of 
<Alarm Volume> and 
<Monitor Volume> in Step 2 of "Adjusting the Volume for Sending/Receiving Faxes" has been changed.
<Alarm Volume> and <Monitor Volume> in Step 2 of "Adjusting the Volume for Sending/Receiving Faxes" has been changed. <Alarm Volume>Adjust the volume of the tone that sounds when the sending or receiving of faxes or printing of received faxes is complete and the volume of the tone that sounds when a fax is canceled or ends due to an error. To mute the sound, press 
several times to set the volume to the far left.
several times to set the volume to the far left. <Monitor Volume>Adjust the volume of the tone that sounds when sending faxes. To mute the sound, press several times to set the volume to the far left.
several times to set the volume to the far left.Using Storage SpaceWorking with Data in Memory MediaWorking with Files and Folders in Memory Media
The explanation for 
<Folder Operations> in step 4 has been changed (description of the third bullet point deleted).
<Folder Operations> in step 4 has been changed (description of the third bullet point deleted).<Folder Operations>Press this in the following cases.
When checking <Details> for a folder that exists in the displayed level
When performing <Create Folder> in the displayed level
Managing the MachineManaging the Machine from a Computer (Remote UI)Managing the Logs
The fifth NOTE statement in "Exporting Logs Automatically" has been changed.
 |
After automatic exporting of the audit logs has succeeded, the collected audit logs are automatically deleted. Audit logs cannot be deleted manually. After automatic exporting and deleting of the audit logs have succeeded, each log is generated. If other log collections do not occur by the next automatic export time, the audit log will not be automatically exported. You can also manually export audit logs from the Remote UI. If automatic exporting fails, the machine will retry multiple times. An error message is displayed on the control panel of the machine if automatic exporting fails even once. Specify an SMB server for Windows Server 2016 or later, or Windows 10 or later. If the machine is turned OFF, exporting will not be performed, even at the specified time. Also, it will not be performed when the machine recovers. If the machine is in the Sleep mode, it will automatically recover and perform exporting at the specified time. Note that if you are using a server that does not support SMB 3.0/3.1 encrypted communication, audit log data travels unencrypted across communication paths while it is being automatically exported. Depending on your environment, automatic exporting of logs may be performed later than the specified time. |
Managing the Machine Functions Linked to Cloud Service
uniFLOW Online Express is no longer available for new applications and new registrations.
Troubleshooting A Message or a Number Starting with "#" (an Error Code) Is Displayed Countermeasures for Each Error Code
A remedy has been added for error #751.
#751
When sending to an SMB server, the response on the server side was slow, causing a wait time timeout on the machine side before the data could be sent or forwarding could be completed.
Set a longer timeout time in <Timeout> on the SMB client.
Troubleshooting A Message or a Number Starting with "#" (an Error Code) Is Displayed Countermeasures for Each Error Code
The remedies for error #804 have been changed. (The second remedy has been deleted.)
#804
When sending to a file server, no folders matched the specified path.
Check the destination.
Troubleshooting A Message or a Number Starting with "#" (an Error Code) Is Displayed Countermeasures for Each Error Code
A remedy has been added for error #807.
#807
You do not have access privileges for the folder or file. Alternatively, the folder or file may have been deleted by another operation.
Allow access to the folder on the server side. Alternatively, contact the server administrator.
Troubleshooting A Message or a Number Starting with "#" (an Error Code) Is Displayed Countermeasures for Each Error Code
The remedies for error #809 have been changed. (The second remedy has been deleted.)
#809
When sending to an SMB server, a file with the same name already exists and overwriting of files is not allowed.
Change the filename and try sending again.
Change the settings of the SMB server to enable files to be overwritten. Alternatively, contact the server administrator.
Appendix MEAP
This machine supports MEAP. Refer to the User's Guide when using MEAP applications for extending the functionality of the machine.
Copying Basic Copy Operations
The description of <Auto (Color/B&W)> in step 2 of "Selecting Color Copying or Black and White Copying" has been changed.
<Auto (Color/B&W)> in step 2 of "Selecting Color Copying or Black and White Copying" has been changed.<Auto (Color/B&W)>Automatically detects the color of the original. Color pages are copied in four colors (CMYK), and black and white pages are copied in black (K) only.
A black-and-white original may be scanned in the color mode, depending on the state of the original and its background. If this happens, set the color mode to <Black & White>.
A color original may be scanned in the black-and-white mode, depending on the state and size of the original. This can happen in cases such as when only the edges of the original are in color. To avoid this, set the color mode to <Full Color>.
About the Machine Hardware Specifications 2-Sided Double Pass Feeder (imageRUNNER 2930i / 2925i)
The 1-sided scanning speed has been changed.
Original Scanning Speed (A4) | 1-sided Scanning Scanning (300 dpi x 300 dpi)*8 Full Color: 25 pages/minute Black-and-White: 35 pages/minute |