Step 3. Restarting the Machine to Reflect the Settings

Finally, restart the machine to reflect the settings.

If the machine has a power switch cover

1
Open the power switch cover of the machine and switch the power switch to the "" side.
2
Wait at least 10 seconds after the system is turned off, and then turn the power switch back to the "" side.
3
Close the power switch cover.
The boot screen is displayed.

If the machine does not have a power switch cover

1
Press the power switch.
2
Wait at least 10 seconds after the system is turned off, and then press the power switch.
The boot screen is displayed.
This completes the procedure for configuring the security settings.