Connecting to a Wireless LAN by Searching for a Router (Access Point Setup Method)
Search for a wireless LAN router (access point) to which to connect, and enter the network key.
When you connect with the access point setup method, the encryption method for WPA/WPA2/WPA3 is set to AES-CCMP.
When you want to use a different encryption method, connect with the manual setup method. Connecting to a Wireless LAN by Setting the Details (Manual Setup Method)
When you connect with the access point setup method, the encryption method for WPA/WPA2/WPA3 is set to AES-CCMP.
When you want to use a different encryption method, connect with the manual setup method. Connecting to a Wireless LAN by Setting the Details (Manual Setup Method)
Administrator privileges are required to connect to a wireless LAN.
Required Preparations |
Prepare the information of the wireless LAN router (SSID or network key) to which you want to connect, and keep it close by. Wireless LAN Router Information Required for Connection When connecting to a wireless LAN router supporting WPA-EAP or WPA2-EAP for the security standard, set IEEE 802.1X. Using IEEE 802.1X |
1
On the control panel, press [Wi-Fi Settings] in the [Home] screen. [Home] Screen
The [Select Network] screen is displayed.
If the login screen appears, enter the Administrator ID and PIN, and then press [Log In]. Administrator ID and PIN
If the message [Do you want to enable Wi-Fi?] appears, press [Yes].
If the message [Could not find the access point.] appears, check that the router is discoverable. Cannot Connect to Wireless LAN
2
Select the SSID of the wireless LAN to which you want to connect.
The Network Key input screen is displayed.
When selecting the SSID of the wireless LAN router supporting WPA-EAP or WPA2-EAP for the security standard, the message [To connect, the values configured in IEEE 802.1X Settings will be applied.] appears. Press [OK], and proceed to Step 4.
When selecting the SSID of the wireless LAN router supporting WPA-EAP or WPA2-EAP for the security standard, the message [To connect, the values configured in IEEE 802.1X Settings will be applied.] appears. Press [OK], and proceed to Step 4.
If you cannot find the wireless LAN router to which you want to connect, check that the router is discoverable. Cannot Connect to Wireless LAN
3
Enter the network key, and press [Apply].
4
When [Connected.] is displayed on the control panel, press [Close].
When the machine is connected to the wireless LAN, [
] appears on the [Home] screen and screen of each function.
] appears on the [Home] screen and screen of each function.5
Wait a few minutes.
By default, an IP address is set automatically.
To use a specific IP address, set this manually.
Setting IPv4 Addresses
Setting IPv6 Addresses
To use a specific IP address, set this manually.
Setting IPv4 Addresses
Setting IPv6 Addresses
 |
If an Error Message Appears during Operation and a Connection Cannot Be EstablishedPress [Close], check the information (SSID or network key) of the wireless LAN router to which you want to connect, and repeat the procedure starting from Step 2. |