Preventing Printing of the Communication Management Report and TX Report
By default, the Communication Management Report is printed automatically when the specified number of communication results for sending scanned data or sending or receiving faxes is reached. In addition, the TX Report is printed automatically when a sending error occurs.
Depending on the settings, the report (Fax Activity Report or Fax TX Report) is printed in the same way, even if only for sending or receiving a fax or for sending results.
Depending on the settings, the report (Fax Activity Report or Fax TX Report) is printed in the same way, even if only for sending or receiving a fax or for sending results.
To prevent these reports from being printed automatically, configure the settings as shown below.
* Fax Activity Report and Fax TX Report can also be configured to send the data of the reports instead of printing them.
Administrator or DeviceAdmin privileges are required.
Communication Management Report
Log in to Remote UI as an administrator  click [Settings/Registration] [Send] [TX Report/Communication Management Report] in [Print/Send Every Specified Number of Transmissions], select [Off] in [Print/Send at Specified Time], select [Off] click [OK] |
On the control panel, press [
Settings/Registration], and configure the setting in [Function Settings]. [Communication Management Report]
Settings/Registration], and configure the setting in [Function Settings]. [Communication Management Report]Fax Activity Report
Log in to Remote UI as an administrator click [Settings/Registration] [Send] [Fax TX Report/Fax Activity Report] in [Print/Send Every Specified Number of Transmissions], select [Off] in [Print/Send at Specified Time], select [Off] click [OK] |
On the control panel, press [ Settings/Registration], and configure the setting in [Function Settings]. [Fax Activity Report]
Settings/Registration], and configure the setting in [Function Settings]. [Fax Activity Report]TX Report
Log in to Remote UI as an administrator click [Settings/Registration] [Send] [TX Report/Communication Management Report] in [TX Report], select [Off] click [OK] |
On the control panel, press [ Settings/Registration], and configure the setting in [Function Settings]. [TX Report]
Settings/Registration], and configure the setting in [Function Settings]. [TX Report]Fax TX Report
Log in to Remote UI as an administrator click [Settings/Registration] [Send] [Fax TX Report/Fax Activity Report] in [Fax TX Report], select [Off] click [OK] |
On the control panel, press [ Settings/Registration], and configure the setting in [Function Settings]. [Fax TX Report]
Settings/Registration], and configure the setting in [Function Settings]. [Fax TX Report]