Configuring the Sending Schedule

This section describes the procedure for configuring the schedule for sending data from this software to the Remote Monitoring Server.
NOTE
For devices monitored using the Cloud Connection Agent function, data is sent according to a schedule retrieved from the Remote Monitoring Server, rather than this schedule.
1.
Select the [System] menu > [Sending Schedule].
2.
On the [Sending Schedule] page, configure the required settings.
[Sending Schedule Settings]
[Send Time]
Select the time to set the data.
The data starts sending within 29 minutes of the specified time.
Example: If 10:30 is specified, it will start sending between 10:30 and 10:59.
If you have upgraded from an older version of this software and a time that is not available in this version was specified in the older version, the time is set to the nearest time before the specified time.
[Sending Interval]
When [24 Hours] is selected, the data is sent at the time selected in [Send Time].
When [12 Hours] is selected, the data is sent at the time selected in [Send Time] and 12 hours later.
3.
Click [Update].