(Settings/Register) 
<Preferences> <Network> <Select Interface>Changed Items
The settings with changes to the content and notes are shown below.
(Ver. 4.02-)
(Ver. 2.04-)Touch panel model
(Settings/Register) <Preferences> <Network> <Select Interface>Black and white LCD model
<Set> <Preferences> <Network> <Select Interface>
<Preferences> <Network> <Select Interface>Separate settings can now be selected for the main line and sub line.
Before change | After change |
<Wired LAN>, <Wireless LAN>, <Wired LAN + Wired LAN>, <Wired LAN + Wireless LAN> | <Main Line>: <Wired LAN>, <Wireless LAN> |
<Sub Line>: When <Wired LAN> is selected: <Off>, <Wired LAN>, <Wireless LAN> When <Wireless LAN> is selected: <Off>, <Wired LAN> |
Touch panel model
(Settings/Register) <Preferences> <Network> <TCP/IP Settings> <Proxy Settings>Black and white LCD model
<Set> <Preferences> <Network> <TCP/IP Settings> <Proxy Settings>
<Preferences> <Network> <TCP/IP Settings> <Proxy Settings>The maximum number of characters for <User Name> and <Password> in <Set Authentication> has been changed.
Before change | After change |
<User Name> (24 characters maximum) <Password> (24 characters maximum) | <User Name> (128 characters maximum) <Password> (128 characters maximum) |
Touch panel model
(Settings/Register) <Management Settings> <Security Settings> <Encryption Settings>Black and white LCD model
[Settings/Registration] [Security Settings] [Encryption/Key Settings] [Encryption Method Settings]
[Security Settings] [Encryption/Key Settings] [Encryption Method Settings]The following setting has been renamed.
Before change | After change |
<Format Encryption Method to FIPS 140-2> | <Format Encryption Method to FIPS 140> |
 |
If you set <Format Encryption Method to FIPS 140> to <On>, you can make the TLS communication encryption method comply with the United States government-approved FIPS (Federal Information Processing Standards) 140, but the following limitations apply. If <TLS 1.0> or <TLS 1.1> is selected for <Specify Allowed Versions>, it will be changed to <TLS 1.2>. <CHACHA20-POLY1305>, <3DES-CBC>, and <X25519> can no longer be selected as the algorithm for TLS.    This setting can only be specified from the Remote UI. |
<Set> <Management Settings> <Security Settings> <Recommended Security Set. for Usage Environment>
<Management Settings> <Security Settings> <Recommended Security Set. for Usage Environment><Print Set.Changes> have been added to the setting items.
Before change | After change |
<1. Intranet And Internet Connection> <2. Direct Internet Connection> <3. Internet Connection Prohibited> <4. Private (Home) Network> <5. Public Network> <6. Highly Confidential Info. Environment> <Clear> | <1. Intranet And Internet Connection> <2. Direct Internet Connection> <3. Internet Connection Prohibited> <4. Private (Home) Network> <5. Public Network> <6. Highly Confidential Info. Environment> <Clear> <Print Set.Changes> |
(Settings/Register) <Function Settings> <Send> <Common Settings> <Data Compression Ratio>The setting item has been changed.
Current name | New name |
<High Ratio>, <Normal>, <Low Ratio> | Level 1 to 2 to 5 |
|
This setting is enabled for files in the JPEG, PDF, or XPS format. However, if you select the compact or trace & smooth mode for the PDF file format or select the compact mode for the XPS file format, the setting will be disabled. This setting is disabled when sending faxes. |
(Settings/Register) <Management Settings> <User Management> <Authentication Management> <Change PIN>The maximum number of digits for the PIN has been changed.
Before change | After change |
(7 characters maximum) | (16 characters maximum) |
(Settings/Register) <Management Settings> <License/Other>The <Allow Use of Print Function from Mobile> item has been deleted.