Cleaning the Pressure Roller for Fixing

If the printout is dirty or smudged, the pressure roller for fixing may be dirty. In this case, you can clean the pressure roller for fixing using paper.
The pressure roller for fixing cannot be cleaned when data is waiting to be printed or a toner cartridge has reached the end of its lifetime.
Required Preparations
Check that there is enough amount of toner remaining in the toner cartridges. Checking the Remaining Amount of Consumables
1
On the control panel, press [Menu] in the [Home] screen. [Home] Screen
2
Press [Adjustment/Maintenance] [Maintenance] [Cleaning the pressure roller for fixing...].
The available paper sizes and types are displayed on the confirmation screen.
3
Check that available paper is loaded, and then press [OK] [Start].
The paper is fed to the machine, and cleaning starts.
When cleaning is completed, a sheet of paper with a printed image (pattern) is output.
Before starting the cleaning procedure, load paper in Drawer 2. Use the largest paper size (long-edge) among the sizes you use frequently.
The following paper can be used for cleaning:
Paper Size: A4, A3, 11 x 17, LTR
Paper Type: Plain 1-2
After the cleaning is complete, print again.
Marks may remain after cleaning. If the problem persists, perform the cleaning procedure again.
EJ9S-0H3