Automatically Selecting the Appropriate Paper Source for a Specific Function
By setting <On> for some paper source under this setting, paper is automatically fed from this paper source. When printing from a computer, a paper source is automatically selected.
When copying or printing by using <<Access Stored Files>>, a paper source is automatically selected depending on the paper specified in <Select Paper>. For example, when paper runs out while printing from Paper Source 1, printing can be resumed automatically by switching to Paper Source 2 as long as paper of the same size is loaded in Paper Source 1 and Paper Source 2.
When copying or printing by using <<Access Stored Files>>, a paper source is automatically selected depending on the paper specified in <Select Paper>. For example, when paper runs out while printing from Paper Source 1, printing can be resumed automatically by switching to Paper Source 2 as long as paper of the same size is loaded in Paper Source 1 and Paper Source 2.
|
To the paper source to be selected automatically, one of the following paper types must be selected for each paper source. 1-Sided Printing: Thin*1, Plain, Recycled, Heavy*1, Color*1 (in white) 2-Sided Printing: Thin*1, Plain, Recycled, Heavy*1, Color*1 (in white) *1 Only paper that can be printed on both sides are available. For more information, see Paper Available for Two-Sided Copying/Two-Sided Printing. When the copy ratio is set to <Auto>, a paper source will not be selected automatically. When one of the following modes is set, a paper source will not be selected automatically. N on 1, Copy ID Card It is necessary to select at least one paper source. However, you cannot set only the multi-purpose tray to <On>. |
1
Press 
(Settings/Register).
(Settings/Register).2
Press <Function Settings> 
<Common> <Paper Feed Settings> <Paper Source Auto Selection>.
<Common> <Paper Feed Settings> <Paper Source Auto Selection>.3
Select the function.
<Other> enables you to make settings for a paper source that is used for outputting reports.
4
Select <On> for each paper source that you want to be selected automatically.
If you selected <Printer> in step 3
Set whether to put multiple paper sources in a group. If paper source grouping is specified, paper source selection is automatically performed within a group when you print by specifying any paper source belonging to that group. To specify paper source grouping, select the <Use Group> check box, press <Change> to select a group which you want to put each paper source in, and press <OK>.
5
Press <OK> <OK>.
<OK>.