<Network Information> <IPv4> Select an item to check Check settings.88W0-027
Checking the IP Address Set on the Machine
To check the IP address, follow the steps below.
Checking IPv4 settings
<Status Monitor> <Network Information> <IPv4> Select an item to check Check settings.
<Network Information> <IPv4> Select an item to check Check settings.Checking IPv6 settings
<Status Monitor> <Network Information> <IPv6> Select an item to check Check settings.
<Network Information> <IPv6> Select an item to check Check settings.NOTE
If the IP address is displayed as "0.0.0.0"
The address is not set properly. Set the IP address again.
To check that settings are correct
Check that the login screen of the Remote UI can be displayed on the computer. Changing the Settings of the Machine from a Computer (Remote UI)
If connected to a switching hub, etc.
Even if the IP address is set correctly, it may not be possible to connect to the network. In this instance, delay the machine's start timing for communication and connect again.
How to set,  1 Select <Menu> in the Home Screen. 2 Select <Preferences> <Network>.If a login screen is displayed, Department ID Management or System Manager IDs have been set on the machine. Enter the Department ID and PIN, and then select <Log In>. 3 Select <Wait Time for Conn. at Startup>. 4 Enter a longer waiting time before starting communication with the network, and then select <Apply>. |