9810-04S
Image Alignment Has a Variation on Long Sheets, or Paper Jams (JAM code 010E) Occur at the Main Station
The setting for the misalignment correction is not suitable. Check the solutions below.
IMPORTANT
This function is displayed only if the settings are made available by your local authorized Canon dealer. Even if this function is displayed, do not allow anyone to change the settings except for the system manager. For more information on changing the settings, contact your local authorized Canon dealer.
Image alignment has a variation on long sheets
Remedy
To improve this situation that occurs when using the long sheet of 220 g/m2 or heavier, adjust the conveyance power and conveyance speed toward the plus end.
1. Adjust the conveyance power stronger.
2. If adjusting the conveyance power does not improve the situation, adjust the conveyance speed faster.
Press
→ [Preferences] → [Paper Settings] → [Paper Type Management Settings] → select the type of paper you are using that is having this problem → press [Details/Edit] → [Change] for <Adjust Image Position> → select [Do Not Use Scanner] → press [Adj. Level for Paper Misalignment Corr.].
Press [Conveyance Power: Rear] or [Conveyance Speed: Rear] and adjust them toward the plus end.
"Paper Type Management Settings" > "Adjusting the Image Position" > "Correct Misalignment" in the User's Guide
Paper jams (JAM code 010E) occur at the main station
Remedy
To improve this situation that occurs when using the long sheet of 180 g/m2 or thinner, adjust the conveyance power and conveyance speed toward the minus end.
1. Adjust the conveyance power weaker.
2. If adjusting the conveyance power does not improve the situation, adjust the conveyance speed slower.
Press
→ [Preferences] → [Paper Settings] → [Paper Type Management Settings] → select the type of paper you are using that is having this problem → press [Details/Edit] → [Change] for <Adjust Image Position> → select [Do Not Use Scanner] → press [Adj. Level for Paper Misalignment Corr.].
Press [Conveyance Power: Rear] or [Conveyance Speed: Rear] and adjust them toward the minus end.
"Paper Type Management Settings" > "Adjusting the Image Position"> "Correct Misalignment" in the User's Guide