>
When Images like These Are Output
9810-05E
When Images like These Are Output
Streaks Appear in Your Printouts
Streaks that are perpendicular to the direction of feed appear in the printout
Streaks that are parallel to the direction of feed appear in the printout
Glossy streaks appear on both edges of the page parallel to the direction of feed
A part of the image is faint, and fine streaks appear in the faint area
Glossy Streaks Appear Stretching from the Leading Edge to the Tail Edge on Paper of High Degree of Finish
Multiple Glossy Streaks Appear Parallel to the Direction of Feed
When Printing on Coated Paper, Stripes Appear near the Leading Edge of the Paper
Streaks that are parallel to the direction of feed appear in the printout
When Printed on Coated Thin Paper (of about 70 to 105 g/m2), Streaks Appear around Center Area of the End Tail of the Paper
Multiple Tiny Streaks Appear that are Perpendicular to the Feeding Direction
Printed Images are not as Clear as You Expected
When Paper with a Longer Width is Used After Copying or Printing Large Volumes of Paper with a Shorter Width, Colors on the Left and Right Edges of Paper are Faint
Color Becomes Faint on the Tail End of the Paper or Toner is not Applied to the Tail End of the Paper
In High Density Images, Uneven Glossy Areas Occur, Toner Splatters around the Edges, or Tiny White Spots Appear
The definition of the printout is low
Coarse Image is Output, or Stripes Parallel to the Feeding Direction Appear
Text and images do not print clearly
White spots like blisters appear
Uneven glossiness that is perpendicular to the direction of feed occurs
Yellow does not appear yellow
If colors that have the same hue but have different brightness are adjacent to each other, the boundary between light areas and dark areas appears white. This is because the toner does not fix to the paper
Toner is not Applied Properly to the Image
Uneven Gloss Occurs on the Paper
Image Alignment Has a Variation on Long Sheets, or Paper Jams (JAM code 010E) Occur at the Main Station
When Marks that are Made through Paper Conveyance Remain
Wave or Scratch Marks Appear Due to Uneven Density
Streaks Like Dents Appear on the Tail Edge Side
Thin Lines Like Pressing Marks or Crease-Like Marks Appear on the Tail Edge Side
Streaks Like Pressing Marks Appear on the Tail Edge Side
Uneven Brightness Appears on Both Lead and Tail Edge Sides, Image Appears Brighter on the Tail Edge Side, or Streaks of Uneven Brightness Appear on the Tail Edge Side
Density Level Appears Uneven in High-Density Gradation Area
Scratch Marks Appear in the Printout
Vertical Streaks Appears in the Printout