Before Replacing the Toner Cartridge

See "Attention (Replacing the Toner Cartridge)" in advance.
When the toner nearly runs out, follow the steps in the procedure below before replacing the toner cartridge. The machine continues printing until the toner runs out completely.
1
Hold the operation panel.
2
Lift the scanning platform.
 When you cannot lift the scanning platform
Make sure that the platen glass is completely closed.
Do not try to forcefully lift the scanning platform, as this may damage the machine.
The platen glass may not be completely closed when a thick document such as books is placed inside. In such case, remove it from the platen glass.
3
Hold the grip on the left front side of the toner cover.
4
Open the toner cover.
5
Remove the toner cartridge.
6
Gently shake the toner cartridge five or six times to evenly distribute the toner inside the cartridge.
7
Insert the toner cartridge.
Fit the protrusions (A) on both sides of the toner cartridge into the guides located on both sides of the machine and slide the toner cartridge into the machine until the toner cartridge comes to rest and is held against the back of the machine.
8
Close the toner cover.
 When you cannot close the toner cover
Make sure that the toner cartridge is properly set in the machine.
Do not try to forcefully close the toner cover, as this may damage the machine.
9
Lower the scanning platform.
85RS-051