Attention (Replacing the Toner Cartridge)

See "Maintenance and Inspections" in "Important Safety Instructions".

WARNING
Do not dispose of a used toner cartridge in an open flame. This may ignite the toner remaining inside the cartridge, resulting in burns or fire. When cleaning up spilled or scattered toner If you accidentally spill or scatter toner, carefully gather the toner particles together or wipe them up with a soft, damp cloth in a way that prevents inhalation. Never use a vacuum cleaner that does not have safeguards against dust explosions to clean up spilled toner. Doing so may cause a malfunction in the vacuum cleaner, or result in a dust explosion due to static discharge.

WARNING

Do not dispose of a used toner cartridge in an open flame.

This may ignite the toner remaining inside the cartridge, resulting in burns or fire.

When cleaning up spilled or scattered toner

If you accidentally spill or scatter toner, carefully gather the toner particles together or wipe them up with a soft, damp cloth in a way that prevents inhalation.

Never use a vacuum cleaner that does not have safeguards against dust explosions to clean up spilled toner. Doing so may cause a malfunction in the vacuum cleaner, or result in a dust explosion due to static discharge.

CAUTION
Precautions to take when you get toner onto your hands or into clothing If toner comes in contact with your hands or clothing, wash them immediately in cold water. Do not use warm water, as it will set the toner and make it difficult to remove the toner stains.
Do not allow the toner to scatter. Do not pull out the sealing tape forcefully or stop pulling the tape halfway, as this may cause toner to spill out. If toner gets into your eyes or mouth, flush them immediately with cold water and consult a physician.
Use caution when lowering the scanning platform Keep your fingers clear of the scanning platform to avoid injury.

IMPORTANT

About replacement toner cartridges

For optimum print quality, using Canon genuine toner cartridges is recommended.

Model Name	Supported Canon Genuine Toner Cartridge
MF3010 / MF3010VP	Canon Cartridge 125

Be careful of counterfeit toner cartridges.

Please be aware that there are counterfeit Canon toner cartridges in the marketplace.

Use of counterfeit toner cartridge may result in poor print quality or machine performance.

Canon is not responsible for any malfunction, accident or damage caused by the use of counterfeit toner cartridge.

For more information, see http://www.canon.com/counterfeit.

Shake the toner cartridge before replacement.

If the toner is not distributed evenly inside the cartridge, this may cause poor print quality.

Hold the toner cartridges properly.

When handling the toner cartridge, hold it properly, as shown in the illustration below. Do not stand it vertically or hold it upside down.

Do not touch the toner cartridge memory (A) or the electrical contacts (B).

This may result in damage to the cartridge.

Do not open the drum protective shutter (A).

Print quality may deteriorate if you touch or damage the drum inside the drum protective shutter (A). Do not touch or open the drum protective shutter (A).

When pulling out the sealing tape

Do not pull the sealing tape at an angle or sideways. If the tape breaks, the tape may not be pulled out completely.

If the sealing tape is still hanging outside the toner cartridge, pull it out completely.

If the tape remains inside the toner cartridge, this may cause poor print quality.

When disposing of the removed sealing tape

Dispose of the packing materials in accordance with local regulations.

Keep the protective bag.

Keep the protective bag for storing the toner cartridge. You will need it when you remove the toner cartridge for machine maintenance or other purposes.

Do not touch the high-voltage contacts (A).

This may result in damage to the machine.

Do not leave the toner cover open for an extended period of time when the toner cartridge is installed.

This may result in print quality deterioration.

NOTE
About the packing materials The packing materials are subject to change in form or placement, or may be added or removed without notice.