Cause 1 | The printer and the computer are not connected correctly. |
Remedy | Check if the printer and the computer are connected correctly. |
Cause 2 | The power of the printer is not turned ON. |
Remedy | Turn the power of the printer ON. |
Cause 1 | The printer and the computer are not connected correctly. |
Remedy | Check if the printer and the computer are connected correctly. |
Cause 2 | The power of the printer is not turned ON. |
Remedy | Turn the power of the printer ON. |
Cause 3 | The printer driver is not installed correctly. |
Remedy | Reinstall the printer driver. (See "Installing the Printer Driver".) |
Cause | The printer is taking a long time to print due to data of large file size, such as color picture data, attached to the document. |
Remedy | Please wait for a while when the Ready indicator is on. |
Cause 1 | The size of the document on the application software differs from that of paper output from the printer (output size). |
Remedy | Reduce the size in [Scaling] in the [Page Setup] dialog box. |
Cause 2 | Printed the data of which the margins specified on the application software are out of this printer's printable area. |
Remedy | The printable area of this printer is an area excluding 0.2 in. (5 mm) (0.4 in. (10 mm) for envelopes and Index Card) from the upper, bottom, right, and left of the paper edges. Therefore, you should secure a margin of 0.2 in. (5 mm) (0.4 in. (10 mm) for envelopes and Index Card) or more around the print data. |