NOTE
|
Commands cannot be added to the ribbon groups displayed by default.
Depending on the window size, even if a command is added to the ribbon, it may not be displayed. In this case, perform one of the following operations.
Change the display order of the commands.
Make the window size bigger.
Click or on the ribbon.
All of the commands may not be displayed on the ribbon, depending on the window size and the number of commands on the ribbon. In this case, commands are displayed as buttons in groups. If you click a button, the commands belonging to that group are displayed in a pull-down list, enabling you to click the commands.
|
NOTE
|
For information on the commands that can be added to the ribbon, see the following.
Buttons registered in the output bar can also be added to the ribbon as commands.
|
NOTE
|
To return the settings of the selected tab to their defaults, click [Restore Defaults] and select [Restore Selected Tab to Defaults].
To return the settings of the ribbon to their defaults, click [Restore Defaults] and select [Restore All Tabs to Defaults].
|
NOTE
|
The display order of the group commands in the tabs displayed by default cannot be changed.
|
NOTE
|
For information on the commands/groups that can be added to the ribbon, see the following.
Document Destination Folders can also be added to the ribbon as commands.
You cannot add commands to the [Tools] tab.
Commands for the following modes cannot be added to the ribbon.
Specify Area Not to Edit Mode
Mail Merge Print Settings Mode
Digital Stamps Mode
Edit Original Pages Mode
Redaction Mode
|
NOTE
|
You cannot add commands to a group added to the ribbon by selecting it in the list on the left of the [Customize the Ribbon] dialog box.
|
NOTE
|
For information on the commands/groups for each mode, see the following.
|
NOTE
|
Commands/groups of multiple modes cannot be set for a single tab.
|
NOTE
|
To return the settings of the selected tab to their defaults, click [Restore Defaults] and select [Restore Selected Tab to Defaults].
To return the settings of the ribbon to their defaults, click [Restore Defaults] and select [Restore All Tabs to Defaults].
|
NOTE
|
The display order of the group commands in the tabs displayed by default cannot be changed.
|