NOTE
|
If the Details Window is not displayed, see the following.
When not specifying the chapter separation settings, select [Chapter Separators Not Specified] in [Layout Settings] on the [Print Settings] tab on the Details Window. Or, click (Print Next Chapter) and select [Chapter Separators Not Specified].
When booklet printing is configured, you cannot use [Change Paper at Chapter Separators].
When 1-sided printing is configured, you cannot use [Change Page at Chapter Separators].
If the [Use print settings of Editor] check box is deselected on the [Print Settings] tab on the Details Window, the ribbon command, or the tool button, [Change Paper at Chapter Separators] cannot be used.
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them.
This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them.
|