Selecting the Setting Method
There are two methods for setting device information. When device information fails to be automatically retrieved, follow one of the procedures below to set the device information.
Directly Entering the IP Address or Host Name of the Device
Searching for the Device on the Network
In [Select the Setting Method] in the [IP Address Settings] dialog box, select one of these methods for setting device information.
|
NOTE
|
||||||
|
You can follow the procedure below to display the [IP Address Settings] dialog box.
|
|
[Enter the IP address or host name of the device directly]
|
Select this to set the device information by directly entering the IP address or host name of the device.
|
|
[Discover devices on network]
|
Select this to set the device information by searching the network for the device.
|
|
[Next]
|
Selecting [Enter the IP address or host name of the device directly] displays [Set Device Information] in the [IP Address Settings] dialog box.
Selecting [Discover devices on network] displays [Discover Devices] in the [IP Address Settings] dialog box.
|
The procedure for setting the device information when [Enter the IP address or host name of the device directly] is selected is as follows.
The procedure for setting the device information when [Discover devices on network] is selected is as follows.
|
1.
|
|
|
2.
|
|
|
3.
|
|
|
4.
|