Outputting Reports
Prints the registration information for Settings/Registration. This is useful for checking settings details. You can manually print the User's Data List whenever necessary.
|
NOTE
|
|
Reports can be printed only if LGL or LTR (plain, recycled, thin, or colour) is loaded in a paper source whose settings in [Other] in [Paper Drawer Auto Selection On/Off] in [Function Settings] (Settings/Registration) are set to 'On'. However, if [Consider Paper Type] for [Copy] is set to 'On' in [Paper Drawer Auto Selection On/Off], you cannot print from a paper source with colour paper specified. (See "Enabling Paper Drawer Auto Selection.")
The following two types of User Data Lists are available:
Send/Receive: Prints all registered information related to the Receive/Forward function from [Function Settings] (Settings/Registration).
Fax: Prints all registered information related to the Fax function from [Function Settings] (Settings/Registration).
For more information on User Data Lists, see "User Data List."
|
1.
Press 
(Settings/Registration).
(Settings/Registration). 2.
Press [Function Settings] → [Receive/Forward] → [Output Report].
Printing the User Data List for Receive/Forward:
Press [TX/RX User Data List] → [Yes].
Printing the User Data List for Fax:
Press [Fax User Data List] → [Yes].