Available Administrator Settings Table (Remote UI)

If the administrator is specified, you can restrict operations by general users and allow the administrator to set the settings of each function from (Settings/Registration). The settings available for operation vary according to the type of administrator. This section describes the settings in (Settings/Registration) that each administrator can operate.
IMPORTANT
For information on the types of administrators, see "Administrator Settings."
All users can set the settings in [Adjustment/Maintenance] (Settings/Registration).

Preferences

If the administrator is specified, the settings below in Preferences can be set only by the administrator.
: Only the administrator can change the settings.
-: Depending on the type of the administrator when using the SSO-H, settings cannot be changed.
Settings/Registration
System Manager/System Administrator (Administrator)
Network Administrator (NetworkAdmin)
Device Administrator (DeviceAdmin)
[Restart Device]
[Paper Settings]
Paper Type Management Settings
-
[Timer/Energy Settings]
Date/Time Settings
-
-
Time Format
-
-
Quick Startup Settings for Main Power
-
-
Restrict Auto Reset Time
-
-
Auto Shutdown Time Settings*
-
-
Auto Shutdown Weekly Timer*
-
-
[Network Settings]
TCP/IP Settings
IP Address Settings (IPv4)
-
IP Address Settings (IPv6)
-
DNS Settings (IPv4)
-
mDNS Settings
-
DNS Settings (IPv6)
-
mDNS Settings
-
WINS Settings
-
LPD Print Settings
-
RAW Print Settings
-
SNTP Settings
-
FTP Print Settings
-
WSD Settings
-
FTP PASV Mode
-
IPP Print Settings
-
Multicast Discovery Settings
-
HTTP Settings
-
SSL Settings
-
Proxy Settings
-
Department ID PIN Confirmation Settings
-
IPSec Settings
-
NetWare Settings
-
SNMP Settings
-
Dedicated Port Settings
-
Spooler
-
Startup Time Settings
-
Ethernet Driver Settings
-
IEEE 802.1X Settings
-
Firewall Settings
IPv4 Address Filter
-
IPv6 Address Filter
-
MAC Address Filter
-
IP Address Block Log
-
[External Interface]
USB Settings
-
-
* If you are using the imageRUNNER ADVANCE C350i/C250i, this item appears only when the appropriate optional product is available for use.

Function Settings

If the administrator is specified, the settings below in Function Settings can be set only by the administrator.
: Only the administrator can change the settings.
-: Depending on the type of the administrator when using the SSO-H, settings cannot be changed.
Settings/Registration
System Manager/System Administrator (Administrator)
Network Administrator (NetworkAdmin)
Device Administrator (DeviceAdmin)
[Common Settings]
Print Settings
Copy Set Numbering Option Settings
-
Secure Watermark/Document Scan Lock Settings
-
Document Scan Lock Operational Settings
-
Set Authentication Method
-
[Copy]
Select Color Settings for Copy
-
[Printer]
Restrict Printer Jobs
-
PDL Selection (Plug-n-Play)
-
[Secure Print]
-
[Send]
Common Settings
Confirm SSL Certificate for WebDAV TX
-
-
TX Report/Communication Management Report
TX Report - Attach TX Image to Report
-
Network Settings - E-Mail/I-Fax Settings
Communications Settings - E-Mail/I-Fax Settings
-
Limit New Destination
-
Only Send E-Mail to Myself
-
Only Send File to Personal Folder
-
Personal Folder Specification Method
-
TX Settings - Fax Settings
Fax TX Report/Fax Activity Report
Fax TX Report - Attach TX Image to Report
-
Set Line
-
Confirm Entered Fax Number
-
Allow Fax Driver TX
-
Remote Fax TX Settings
[Receive/Forward]
Common Settings
Divided Data RX Timeout/Always Send Notice for RX Errors
-
Handle Files with Forwarding Errors
-
Forwarding Settings
-
Memory Lock Settings
-
Fax Settings-RX Settings
RX Start Speed/RX Password
-
[Store/Access Files]
Network Settings
Protocol for External Reference
SSL Certificate Confirmation Settings for Network Access
-
-
Memory Media Settings
-
* The setting names may differ depending on the optional products available for use.

Set Destination

If the administrator is specified, the settings below in Set Destination can be set only by the administrator.
: Only the administrator can change the settings.
-: Depending on the type of the administrator when using the SSO-H, settings cannot be changed.
Settings/Registration
System Manager/System Administrator (Administrator)
Network Administrator (NetworkAdmin)
Device Administrator (DeviceAdmin)
[Address Book PIN]
-
-
[Manage Address Book Access Numbers]
-
-
[Address Book Export Settings]
-
-
[Register LDAP Server]
[Register/Edit LDAP Search]
[Acquire Remote Address Book]

Management Settings

If the administrator is specified, the settings below in Management Settings can be set only by the administrator.
: Only the administrator can change the settings.
-: Depending on the type of the administrator when using the SSO-H, settings cannot be changed.
Settings/Registration
System Manager/System Administrator (Administrator)
Network Administrator (NetworkAdmin)
Device Administrator (DeviceAdmin)
[User Management]
System Manager/Contact Person Information Settings
-
-
Department ID Management
-
-
[Device Management]
Device Information Settings
-
-
Certificate Settings
Key and Certificate Settings
CA Certificate Settings
Certificate Revocation List (CRL) Settings
Display Job Status Before Authentication
-
-
Display Log
-
-
Audit Log Retrieval
-
-
Key Operation Log Store Settings
-
-
Export/Clear Audit Log
-
-
Encryption Method Settings
-
-
[License/Other]
Message Board/Support Link
-
-
Remote UI Settings
-
-
Remote Operation Settings
-
-
ACCESS MANAGEMENT SYSTEM Settings
-
-
MEAP Settings
-
-
Register/Update Software
-
-
[Data Management]
Delete Existing Data Settings
-
-
Import/Export All
Import
-
-
Export
-
-
Import/Export Results
-
-
Import/Export Individually
Address Lists
-
-
Device Settings (Forwarding Settings, Address Book, Send Function Favorite Settings)
-
-
Web Access Favorites
-
-
Printer Settings
-
-
Paper Information
-
-
0HYA-1LL